Resetting The Product - Mitsubishi Electric MELIPC MI5A1P User Manual

Resetting the product

This section shows the procedure to reset this product.
The Windows part of this product can be reset individually.
For details on the individual reset function, refer to the following manual.
MELIPC MI5000 Series User's Manual (Application)
Operating procedure
1.
Shut down Windows from Windows Start.
The WIN RDY LED flashes during a shutdown.
2.
Check that the WIN RDY LED turns OFF.
3.
Execute the C Controller module dedicated function (CCPU_ShutdownRom) on the VxWorks part.
4.
Confirm that the MAIN RUN LED is flashing (at high-speed).
5.
Press and hold the MELIPC RESET/WIN RESET switch to MELIPC RESET for 1 second or more.
The MELIPC RESET/WIN RESET switch can also be operated through remote operation by MI Configurator.
(MELIPC MI5000 Series User's Manual (Application))
6.
This product is reset.
7.
After the VX RDY LED and WIN RDY LED flash, confirm that they are on.
*1 This procedure can be omitted when the system drive is protected by the Unified Write Filter (UWF) and folders and files excluded from
UWF protection are not being accessed.
*2 This step can be omitted when user programs that access the user drive are not being executed.
APPX
136
Appendix 5 Turning OFF or Resetting This Product
* 1
* 1
* 2
* 2