Table of Contents
Advertisement
11
TROUBLESHOOTING
This section explains the content, causes, and solutions of errors that occur when the system is used.
If the issue is not resolved after troubleshooting, consult your local Mitsubishi representative.
Troubleshooting procedure
If trouble occurs, troubleshoot using the following procedure.
1.
Check the LEDs of this product.
Check the lighting status of the LEDs of this product. (MELIPC MI5000 Series User's Manual (Application))
2.
Connect MI Configurator, and then execute the diagnostic function. (Page 93 Checking Errors with MI Configurator)
Error causes and corrective actions can be checked. If the cause cannot be identified by the MELIPC diagnosis, check the
operation and error history from the event history of MI Configurator, and then identify the cause.
3.
If the cause cannot be identified by steps 1 and 2, troubleshoot each phenomenon. (User's manual (application) for
each module)
The errors that occurred on the Windows part of this product and the rest of the error log can be checked by
using the event viewer.
Page 101 Checking Events with the Event Viewer
11 TROUBLESHOOTING
92
Advertisement
Table of Contents
