Getting Help
4. Slip your hand through the armband straps until the armband is in the desired location. Grasp
the tab at one end of the strap to loosen and then tighten each strap until the armband is
comfortably snug.
5. Ensure the HX2 on the armband is stable and does not slide or slip around your arm.
6. Periodically check the straps, strap brackets and hook and loop fabric areas for damage. The
damaged parts should be replaced before the straps or strap brackets are used on an armband
again.
Note:
Getting Help
All LXE manuals are now available on one CD and they can also be viewed/downloaded from the
LXE ServicePass website. Contact your LXE representative to obtain the LXE Manuals CD.
You can also get help from LXE by calling the telephone numbers listed on the LXE Manuals
CD, in the file titled Contacting LXE. This information is also available on the LXE website's
ServicePass page.
Explanations of terms and acronyms used in this manual are located in the file titled LXE
Technical Glossary on the LXE Manuals CD.
Manuals
• HX2 User's Guide - English
• HX2 Cradle Reference Guide
• HX2 Reference Guide
• HX2 Multi-Charger User's Guide
• RFTerm Reference Guide
• LXE Security Primer
• CE API Programmers Guide
• Ring Scanner Programming Guide
Contact your LXE representative for user and reference guide availability and subsequent updates.
E-EQ-HX2RG-D
The armband is washable, but only the mesh arm cover and straps are machine
washable.
53
HX2 Reference Guide
Need help?
Do you have a question about the HX2 and is the answer not in the manual?