Bluetooth; Initial Use; Figure 1-29 Bluetooth Lxez Pairing Display - LXE HX2 Reference Manual

32

Bluetooth

or Tap the Bluetooth icon in the taskbar, on the desktop, or in the Control Panel
to open the LXEZ Pairing application.
Bluetooth is an option and may not be available on all HX2s. The HX2 default Bluetooth
hardware setting is On.
The LXE HX2 Bluetooth
devices. Only LXE printers or scanners are recognized and displayed in the Bluetooth panel. All
other Bluetooth devices are ignored.
Prerequisite
The Bluetooth remote device should be as close as possible, and in direct line of sight, with the
HX2 during the pairing process.

Initial Use

1. Select Start | Settings | Control Panel | Bluetooth.
2. Tap the Settings Tab.
3. Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth
HX2 default name is determined by the LXE factory installed software version. LXE strongly
urges assigning every HX2 a unique name (up to 32 characters) before Bluetooth Discovery
is initiated.
4. Check or uncheck the HX2 Bluetooth options on the Settings tab.
5. Tap the OK button to save your changes or the X button to discard any changes.
HX2 Reference Guide
®
module is designed to Discover and pair with nearby LXE Bluetooth
The Bluetooth devices (printers and/or scanners) have been setup to allow them
to be "Discovered" and "Connected/Paired". The System Administrator is
familiar with the pairing function of the Bluetooth devices.

Figure 1-29 Bluetooth LXEZ Pairing Display

Bluetooth
E-EQ-HX2RG-D