Functions - IKEA FINPUTSAD Manual

OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
OPTIONS AND FUNCTIONS
and beeps will sound. The option will not be enabled.
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
OPTIONS AND FUNCTIONS
FRANÇAIS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
FLEXI WASH
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times

Functions

If there are not many dishes to be washed, a half loading
and beeps will sound. The option will not be enabled.
FLEXI WASH
may be used in order to save water, electricity and
OPTIONS AND FUNCTIONS
If there are not many dishes to be washed, a half loading
detergent.
LAVAGE FLEXIBLE
FLEXI WASH
may be used in order to save water, electricity and
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
Select the program and then press the FLEXI WASH button:
S'il n'y a pas beaucoup de vaisselle à laver, la demi-
If there are not many dishes to be washed, a half loading
detergent.
charge peut être utilisée pour économiser de l'eau, de
the symbol of the chosen rack will appear on the display.
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
may be used in order to save water, electricity and
Select the program and then press the FLEXI WASH button: l'électricité, et du détergent.
and beeps will sound. The option will not be enabled.
By default the appliance washes dishes in all racks.
detergent.
Sélectionnez le programme et appuyez ensuite sur la
The machine will switch off automatically during certain
the symbol of the chosen rack will appear on the display.
To wash only the specific rack, press this button repeatedly:
FLEXI WASH
Select the program and then press the FLEXI WASH button: touche FLEXIBLE WASH : le symbole du panier choisi
extended periods of inactivity, in order to minimise electri-
By default the appliance washes dishes in all racks.
shown on the display (only lower rack)
If there are not many dishes to be washed, a half loading
s'affichera sur l'écran.
the symbol of the chosen rack will appear on the display.
city consumption. If the crockery is only lightly soiled or
To wash only the specific rack, press this button repeatedly:
may be used in order to save water, electricity and
Par défaut, l'appareil lave la vaisselle sur tous les
By default the appliance washes dishes in all racks.
if it has been rinsed with water before being placed in the detergent.
shown on the display (only lower rack)
paniers.
Select the program and then press the FLEXI WASH button:
shown on the display (only upper rack)
To wash only the specific rack, press this button repeatedly:
dishwasher, reduce the amount of detergent used accordingly.
Pour seulement laver la vaisselle sur un panier
the symbol of the chosen rack will appear on the display.
shown on the display (only lower rack)
By default the appliance washes dishes in all racks.
particulier, appuyez plusieurs fois sur cette touche :
shown on the display (only upper rack)
To wash only the specific rack, press this button repeatedly:
MODIFYING A RUNNING PROGRAM
shown on the display (only cutlery rack)
s'affiche à l'écran (panier inférieur seulement)
shown on the display (only lower rack)
If a wrong program was selected, it is possible to change it, pro-
shown on the display (only upper rack)
shown on the display (only cutlery rack)
vided that it has only just begun: open the door, press and hold
s'affiche à l'écran (panier supérieur seulement)
shown on the display (only upper rack)
shown on the display (option is OFF and the appliance will
the ON/OFF button, the machine will switch off.
wash dishes in all racks).
shown on the display (only cutlery rack)
s'affiche à l'écran (compartiment à couvert seulement)
Switch the machine back on using the ON/OFF button and select
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
Remember to load the upper or lower rack only, and to
the new wash cycle and any desired options; Start the wash cycle
wash dishes in all racks).
ENGLISH reduce the amount of detergent accordingly.
s'affiche à l'écran (l'option est ÉTEINTE et l'appareil
shown on the display (option is OFF and the appliance will
shown on the display (option is OFF and the appliance will
by pressing START/Pause button and closing the door within 4 sec.
Remember to load the upper or lower rack only, and to
wash dishes in all racks).
lave la vaisselle sur tous les paniers).
If upper rack is removed, please apply detergent
wash dishes in all racks).
Remember to load the upper or lower rack only, and to
reduce the amount of detergent accordingly.
directly to tub instead of detergent dispenser.
Chargez seulement le panier supérieur ou inférieur, et réduisez
reduce the amount of detergent accordingly.
ADDING EXTRA CROCKERY
Remember to load the upper or lower rack only, and to
If upper rack is removed, please apply detergent
If upper rack is removed, please apply detergent
la quantité de détergent en conséquence. Si le panier supérieur
reduce the amount of detergent accordingly.
Without switching off the machine, open the door (START/Pause
directly to tub instead of detergent dispenser.
directly to tub instead of detergent dispenser.
est enlevé, appliquez un détergent directement dans le tambour
DELAY
led starts blinking) (be ware of HOT steam!) and place the If upper rack is removed, please apply detergent
à la place du distributeur de détergent.
crockery inside the dishwasher. Press the START/Pause button directly to tub instead of detergent dispenser.
DELAY
The start time of the program may be delayed for a period
DELAY
DELAY
DIFFÉRÉ
The start time of the program may be delayed for a period
and close the door within 4 sec., the cycle will resume from the
of time between 1 and 12 hours.
of time between 1 and 12 hours.
Le début du programme peut être retardé pour une
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
1. Press the DELAY button: the corresponding «h» symbol
point at which it was interrupted.
DELAY
1. Press the DELAY button: the corresponding «h» symbol
période entre 1 et 12 heures.
of time between 1 and 12 hours. of time between 1 and 12 hours.
appears on the display; each time you press the button,
appears on the display; each time you press the button,
1. Appuyez sur la touche DIFFÉRÉ : le symbole « h
The start time of the program may be delayed for a period
the time (1h, 2h, etc. up to max. 12h) from the start of 1. Press the DELAY button: the corresponding «h» symbol
the time (1h, 2h, etc. up to max. 12h) from the start of
ACCIDENTAL INTERRUPTIONS
1. Press the DELAY button: the corresponding «h» symbol
» correspondant apparaît à l'écran ; chaque fois
the selected wash cycle will be increased.
of time between 1 and 12 hours.
appears on the display; each time you press the button,
the selected wash cycle will be increased.
appears on the display; each time you press the button,
que vous appuyez sur la touche, le temps (1 heure,
2. Select the wash program, press the START/PAUSE
If the door is opened during the wash cycle, or if there is a power
1. Press the DELAY button: the corresponding «h» symbol
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer 2. Select the wash program, press the START/PAUSE
2 heures, etc. jusqu'à un max de 12 heures) avant le the time (1h, 2h, etc. up to max. 12h) from the start of
cut, the cycle stops. Press the START/Pause button and close
appears on the display; each time you press the button,
will begin counting down.
the selected wash cycle will be increased.
début du cycle de lavage augmente. button and within 4 seconds close the door: the timer
the selected wash cycle will be increased.
the door within 4 sec., the cycle will resume from the point at
3. Once this time has elapsed, the indicator light «h»
the time (1h, 2h, etc. up to max. 12h) from the start of
2. Select the wash program, press the START/PAUSE
2. Sélectionnez le programme de lavage, appuyez
will begin counting down.
2. Select the wash program, press the START/PAUSE
switches off and the wash cycle begins.
which it was interrupted.
the selected wash cycle will be increased.
sur le bouton START/PAUSE et dans les 4 secondes, button and within 4 seconds close the door: the timer
To adjust the delay time and select a shorter period of time,
3. Once this time has elapsed, the indicator light «h»
button and within 4 seconds close the door: the timer
press the DELAY button. To cancel it, press the button 2. Select the wash program, press the START/PAUSE
fermez la porte : la minuterie commencera le compte
will begin counting down.
switches off and the wash cycle begins.
will begin counting down.
repeatedly until the selected delayed start indicator light
à rebours.
button and within 4 seconds close the door: the timer
3. Once this time has elapsed, the indicator light «h»
To adjust the delay time and select a shorter period of time,
«h» switches off.
3. Once this time has elapsed, the indicator light «h»
3. Une fois le temps écoulé, le voyant « h » s'éteint
will begin counting down.
switches off and the wash cycle begins.
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
switches off and the wash cycle begins.
et le cycle de lavage démarre. Pour ajuster le délai
3. Once this time has elapsed, the indicator light «h»
has been started.
To adjust the delay time and select a shorter period of time,
repeatedly until the selected delayed start indicator light
To adjust the delay time and select a shorter period of time,
et sélectionner une période de temps plus courte,
switches off and the wash cycle begins.
press the DELAY button. To cancel it, press the button
«h» switches off.
press the DELAY button. To cancel it, press the button appuyez sur la touche DIFFÉRÉ. Pour l'annuler,
SHORT TIME
To adjust the delay time and select a shorter period of time,
repeatedly until the selected delayed start indicator light
appuyez sur la touche à plusieurs reprises jusqu'à
repeatedly until the selected delayed start indicator light
The DELAY function cannot be set once a wash cycle
This option can be used to reduce the duration of the main
press the DELAY button. To cancel it, press the button
«h» switches off.
ce que le témoin de départ différé sélectionné
programs while maintaining the same washing and drying «h» switches off.
has been started.
repeatedly until the selected delayed start indicator light
« h » s'éteigne.
performance levels.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
After selecting the program, press the SHORT TIME button «h» switches off.
La fonction Différé ne peut pas être réglée une fois
has been started. has been started.
and the indicator light will switch on. To deselect the option,
que le cycle de lavage a commencé.
SHORT TIME
The DELAY function cannot be set once a wash cycle
press the same button again.
has been started.
This option can be used to reduce the duration of the main PROGRAMME COURT
EXTRA DRY SHORT TIME
Cette option permet de réduire la durée des
programs while maintaining the same washing and drying
To improve the drying of the dishes, after selecting the
This option can be used to reduce the duration of the main programmes principaux tout en conservant les
performance levels.
program, press the EXTRA DRY button and the indicator
SHORT TIME
niveaux de rendement du lavage et du séchage.
programs while maintaining the same washing and drying
light comes on.
After selecting the program, press the SHORT TIME button
Après avoir sélectionné le programme, appuyez sur la
This option can be used to reduce the duration of the main
A higher temperature during the final rinse and an extended
performance levels.
and the indicator light will switch on. To deselect the option,
Program
drying phase allow for improving drying. To deselect the
touche SHORT TIME et le voyant s'illumine. Appuyez
programs while maintaining the same washing and drying
After selecting the program, press the SHORT TIME button
press the same button again.
option, press the same button again. The EXTRA DRY
de nouveau sur la touche pour annuler l'option.
performance levels.
and the indicator light will switch on. To deselect the option,
option results in the lengthening of the wash cycle.
After selecting the program, press the SHORT TIME button
press the same button again. EXTRA DRY
EXTRA DRY
and the indicator light will switch on. To deselect the option,
Pour améliorer le séchage de la vaisselle, après avoir
Eco
1
To improve the drying of the dishes, after selecting the
sélectionner le programme, appuyez sur la touche
press the same button again.
EXTRA DRY
program, press the EXTRA DRY button and the indicator
EXTRA DRY et le voyant s'illumine. Une température
Conventional To improve the drying of the dishes, after selecting the
light comes on. plus élevée lors du dernier rinçage et une phase de
EXTRA DRY
2
program, press the EXTRA DRY button and the indicator
wash and dry séchage plus longue permet d'améliorer le séchage.
A higher temperature during the final rinse and an extended
To improve the drying of the dishes, after selecting the
light comes on. Appuyez de nouveau sur la touche pour annuler
drying phase allow for improving drying. To deselect the
program, press the EXTRA DRY button and the indicator
l'option. L'option SÉCHAGE EXTRA prolonge le cycle de
A higher temperature during the final rinse and an extended
option, press the same button again. The EXTRA DRY
Intensive
3
lavage.
light comes on.
drying phase allow for improving drying. To deselect the
option results in the lengthening of the wash cycle.
A higher temperature during the final rinse and an extended
option, press the same button again. The EXTRA DRY
TABLET (Tab)
PASTILLE
drying phase allow for improving drying. To deselect the
option results in the lengthening of the wash cycle.
Fast Ce réglage vous permet d'optimiser le rendement du
4
This setting allows you to optimize the performance of
option, press the same button again. The EXTRA DRY
programme selon le type de détergent utilisé.
the program according to the type of detergent used.
option results in the lengthening of the wash cycle.
Appuyez sur la touche DÉPART/PAUSE pendant
Press the START/PAUSE button for 3 seconds (the
3 secondes (le symbole correspondant s'allumera) si
Sanitizing
5
corresponding symbol will light up) if you use combined
vous utilisez un détergent tout-en-un sous forme de
detergents in tablet form (rinse aid, salt and detergent in
pastille (rinçage, sel et détergent en 1 dose).
Si vous utilisez un détergent en poudre ou liquide,
1 dose).
Pre-Wash
6
cette option doit être éteinte.
If you use powder or liquid detergent, this option
should be off.
Self-Clean
7
FLEXI WASH
If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and
detergent.
Select the program and then press the FLEXI WASH button:
the symbol of the chosen rack will appear on the display.
By default the appliance washes dishes in all racks.
To wash only the specific rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
Remember to load the upper or lower rack only, and to
reduce the amount of detergent accordingly.
If upper rack is removed, please apply detergent
directly to tub instead of detergent dispenser.
DELAY
The start time of the program may be delayed for a period
of time between 1 and 12 hours.
1. Press the DELAY button: the corresponding «h» symbol
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of
the selected wash cycle will be increased.
2. Select the wash program, press the START/PAUSE
button and within 4 seconds close the door: the timer
will begin counting down.
3. Once this time has elapsed, the indicator light «h»
switches off and the wash cycle begins.
To adjust the delay time and select a shorter period of time,
press the DELAY button. To cancel it, press the button
repeatedly until the selected delayed start indicator light
«h» switches off.
The DELAY function cannot be set once a wash cycle
has been started.
SHORT TIME
This option can be used to reduce the duration of the main
programs while maintaining the same washing and drying
performance levels.
After selecting the program, press the SHORT TIME button
and the indicator light will switch on. To deselect the option,
press the same button again.
EXTRA DRY
NaturalDry
To improve the drying of the dishes, after selecting the
NaturalDry is a convection drying system which automatically
program, press the EXTRA DRY button and the indicator
opens the door during/after drying phase to ensure exceptional
light comes on.
drying performance every day. Door opens at the temperature
A higher temperature during the final rinse and an extended
that is safe to your kitchen furniture, thus door will not be opened
drying phase allow for improving drying. To deselect the
when the option of SHORT TIME is on.
option, press the same button again. The EXTRA DRY
As additional steam protection, special designed protection foil is
option results in the lengthening of the wash cycle.
added together with the dishwasher. To see how to mount protec-
tion foil please refer to (INSTALLATION GUIDE).
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding
button (6 sec).
2. You are currently in Light Control Menu (please refer to
OPERATION INDICATOR description), if you don't want to
change anything please press and hold
the two letters appears on the display)
3. You switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing
E
To confirm the change and exit from the Control Menu please
press and hold
11
50°
55°
rapidly 3 times
65°
-
50°
65°
-
-
-
65°
TABLET (Tab)
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the START/PAUSE button for 3 seconds (the
corresponding symbol will light up) if you use combined
detergents in tablet form (rinse aid, salt and detergent in
1 dose).
If you use powder or liquid detergent, this option
should be off.
INDICATEUR DE FONCTIONNEMENT
TABLET (Tab)
OPERATION INDICATOR
Un voyant LED projeté sur le sol indique que
A LED light projected on the floor indicates that the
This setting allows you to optimize the performance of
le lave-vaisselle fonctionne. Un des modes de
dishwasher is working. One of the following operating
the program according to the type of detergent used.
modes can be selected:
fonctionnement suivant peut être sélectionné :
a) Disabled function.
Press the START/PAUSE button for 3 seconds (the
a) Fonction désactivée.
b) When the cycle starts the light goes on for few seconds,
TABLET (Tab)
b) Lorsque que le cycle est lancé, le voyant s'illumine corresponding symbol will light up) if you use combined
stays off during the cycle and flashes at the end of the
This setting allows you to optimize the performance of
cycle.
quelques secondes; il reste éteint durant le cycle, et
detergents in tablet form (rinse aid, salt and detergent in
the program according to the type of detergent used.
c) The light stays on during the cycle and flashes at the
clignote à la fin du cycle.
1 dose).
Press the START/PAUSE button for 3 seconds (the
end of the cycle (default mode).
c) Le voyant reste allumé durant le cycle et clignote à
corresponding symbol will light up) if you use combined If the delayed start was set, the light goes on either for the
If you use powder or liquid detergent, this option
la fin du cycle (mode par défaut).
detergents in tablet form (rinse aid, salt and detergent in first few seconds or the entire duration of the countdown,
should be off.
based on whether mode b) or c) was set.
1 dose).
Si le Départ différé est sélectionné, le voyant
The light goes off every time the door is opened. To select
If you use powder or liquid detergent, this option
s'illumine durant les premières secondes, ou pour la
the mode you prefer, switch on the machine, hold down
should be off.
durée du compte à rebours, selon que le mode b) ou
button P until one of the three letters appears on the display,
OPERATION INDICATOR
press button P until you reach the desired letter (or mode),
c) ait été réglé. Le voyant s'éteint chaque fois que la
ENGLISH
OPERATION INDICATOR hold down button P to confirm the selection.
A LED light projected on the floor indicates that the
porte est ouverte.
Note: If NaturalDry is active and it opens the door, then
A LED light projected on the floor indicates that the
Pour sélectionner votre mode préférez, allumez
dishwasher is working. One of the following operating
Operation Indicator will not flash at the end of cycle.
dishwasher is working. One of the following operating
l'appareil, appuyez sur la touche P jusqu'à ce qu'une
modes can be selected:
modes can be selected:
des trois lettre apparaisse à l'écran, appuyez sur la
a) Disabled function.
a) Disabled function.
Make sure the cap is screwed on tightly, so that no detergent can ENGLISH
b) When the cycle starts the light goes on for few seconds, NaturalDry touche P pour afficher la lettre (mode) désiré, et
b) When the cycle starts the light goes on for few seconds,
get into the container during the wash program (this could damage
stays off during the cycle and flashes at the end of the
NaturalDry is a convection drying system which automatically appuyez de nouveau sur la touche P pour confirmer
the water softener beyond repair).
cycle.
opens the door during/after drying phase to ensure exceptional
votre sélection.
As soon as this procedure is complete, run a program without
c) The light stays on during the cycle and flashes at the drying performance every day. Door opens at the temperature
ENGLISH
Remarque : Si NaturalDry est actif et qu'il ouvre
loading. The "Pre-Wash" program alone is NOT that is safe to your kitchen furniture, thus door will not be opened
end of the cycle (default mode).
Make sure the cap is screwed on tightly, so that no detergent can
c) The light stays on during the cycle and flashes at the
when the option of SHORT TIME is on. la porte, alors l'Indicateur de fonctionnement ne
If the delayed start was set, the light goes on either for the
Residual saline solution or grains of salt can lead to corrosion,
get into the container during the wash program (this could damage
As additional steam protection, special designed protection foil is
first few seconds or the entire duration of the countdown,
clignotera pas à la fin du cycle.
irreparably damaging the stainless steel components.
the water softener beyond repair).
added together with the dishwasher. To see how to mount protec-
based on whether mode b) or c) was set.
The guarantee is not applicable if faults are caused by such
If the delayed start was set, the light goes on either for the
As soon as this procedure is complete, run a program without tion foil please refer to (INSTALLATION GUIDE).
Make sure the cap is screwed on tightly, so that no detergent can
The light goes off every time the door is opened. To select NATURALDRY
circumstances.
NaturalDry functionality could be disabled by the user as follows:
loading. The "Pre-Wash" program alone is NOT first few seconds or the entire duration of the countdown,
the mode you prefer, switch on the machine, hold down get into the container during the wash program (this could damage
Le Système d'ouverture de porte NaturalDry est un système de séchage à
1. Go to the Dishwasher software menu pressing and holding
Residual saline solution or grains of salt can lead to corrosion,
button P until one of the three letters appears on the display,
the water softener beyond repair). based on whether mode b) or c) was set.
button (6 sec).
convection qui ouvre automatiquement la porte pendant/après la phase
press button P until you reach the desired letter (or mode), irreparably damaging the stainless steel components.
2. You are currently in Light Control Menu (please refer to NaturalDry As soon as this procedure is complete, run a program without
de séchage pour assurer une performance de séchage exceptionnelle The light goes off every time the door is opened. To select
heating element may be damaged as a result.
hold down button P to confirm the selection.
The guarantee is not applicable if faults are caused by such
OPERATION INDICATOR description), if you don't want to
loading. The "Pre-Wash" program alone is NOT
chaque jour. La porte s'ouvre à une température qui est sûre pour les
Whenever you need to add salt, it is mandatory to complete the mode you prefer, switch on the machine, hold down
Note: If NaturalDry is active and it opens the door, then
Door opening system NaturalDry is a convection drying system
change anything please press and hold
circumstances.
Residual saline solution or grains of salt can lead to corrosion,
meubles de votre cuisine. À titre de protection supplémentaire contre
Operation Indicator will not flash at the end of cycle.
the procedure before the beginning of the washing cycle. the two letters appears on the display)
button P until one of the three letters appears on the display,
which automatically opens the door during/after drying phase to
irreparably damaging the stainless steel components.
3. You switched to NaturalDry Control Menu, you could change
la vapeur, une feuille de protection spécifiquement conçue est ajoutée
press button P until you reach the desired letter (or mode),
ensure exceptional drying performance every day. Door opens at
The guarantee is not applicable if faults are caused by such
status of NaturalDry functionality by pressing
SETTING THE WATER HARDNESS avec le lave-vaisselle. Pour voir comment monter la feuille de protection,
heating element may be damaged as a result.
E
– enabled
circumstances.
hold down button P to confirm the selection.
the temperature that is safe to your kitchen furniture.
consulter le (GUIDE D'INSTALLATION).
To allow the water softener to work in a perfect way, it is essential
Whenever you need to add salt, it is mandatory to complete To confirm the change and exit from the Control Menu please
Note: If NaturalDry is active and it opens the door, then
La fonctionnalité NaturalDry pourrait être désactivée par As additional steam protection, special designed protection foil is
that the water hardness setting is based on the actual water hard-
press and hold
the procedure before the beginning of the washing cycle.
ness in your house. This information can be obtained from your local l'utilisateur comme suit :
added together with the dishwasher. To see how to mount protec- NaturalDry
Operation Indicator will not flash at the end of cycle.
heating element may be damaged as a result.
water supplier. The factory setting is for average (3) water hardness.
1. Allez au menu Indicateur de fonctionnement comme dans
SETTING THE WATER HARDNESS
tion foil please refer to (INSTALLATION GUIDE).
Whenever you need to add salt, it is mandatory to complete
NaturalDry is a convection drying system which automatically
la dernière étape, appuyez sur
To allow the water softener to work in a perfect way, it is essential NaturalDry
NaturalDry functionality could be disabled by the user as follows:
• Switch on the appliance by pressing the ON/OFF button. the procedure before the beginning of the washing cycle.
opens the door during/after drying phase to ensure exceptional
that the water hardness setting is based on the actual water hard- jusqu'à ce que le menu apparaisse.
• Switch off the appliance by pressing the ON/OFF button.
1. Go to the Dishwasher software menu pressing and holding
NaturalDry is a convection drying system which automatically
drying performance every day. Door opens at the temperature
ness in your house. This information can be obtained from your local
2. Appuyez sur
SETTING THE WATER HARDNESS
NaturalDry
• Hold down button
button (6 sec).
opens the door during/after drying phase to ensure exceptional
that is safe to your kitchen furniture, thus door will not be opened
water supplier. The factory setting is for average (3) water hardness.
pour atteindre le menu NaturalDry.
To allow the water softener to work in a perfect way, it is essential
• Switch on the appliance by pressing the ON/OFF button.
11
NaturalDry is a convection drying system which automatically 2. You switched to NaturalDry Control Menu, you could change
drying performance every day. Door opens at the temperature
when the option of SHORT TIME is on.
3. Vous passez au Menu de contrôle NaturalDry, vous pouvez that the water hardness setting is based on the actual water hard-
• The current selection level number and the salt indicator light
• Switch on the appliance by pressing the ON/OFF button.
opens the door during/after drying phase to ensure exceptional status of NaturalDry functionality by pressing
that is safe to your kitchen furniture, thus door will not be opened
ness in your house. This information can be obtained from your local
changer d'état de la fonctionnalité NaturalDry en appuyant As additional steam protection, special designed protection foil is
• Switch off the appliance by pressing the ON/OFF button.
E
drying performance every day. Door opens at the temperature
– enabled
water supplier. The factory setting is for average (3) water hardness.
• Press button when the option of SHORT TIME is on.
sur le bouton
added together with the dishwasher. To see how to mount protec-
• Hold down button
WATER HARDNESS TABLE). that is safe to your kitchen furniture, thus door will not be opened To confirm the change and exit from the Control Menu please
E – activé d – désactivé As additional steam protection, special designed protection foil is
• Switch on the appliance by pressing the ON/OFF button.
tion foil please refer to (INSTALLATION GUIDE).
• Switch on the appliance by pressing the ON/OFF button.
when the option of SHORT TIME is on. press and hold
• Pour confirmer le changement et sortir du Menu Contrôle, The current selection level number and the salt indicator light
added together with the dishwasher. To see how to mount protec-
• Switch off the appliance by pressing the ON/OFF button. NaturalDry functionality could be disabled by the user as follows:
appuyez sur le bouton As additional steam protection, special designed protection foil is
• Hold down button
tion foil please refer to (INSTALLATION GUIDE).
1. Go to the Dishwasher software menu pressing and holding
• Press button
Level
• Switch on the appliance by pressing the ON/OFF button.
added together with the dishwasher. To see how to mount protec-
NaturalDry functionality could be disabled by the user as follows:
button (6 sec).
d WATER HARDNESS TABLE).
– enabled – disabled
• The current selection level number and the salt indicator light
tion foil please refer to (INSTALLATION GUIDE).
1. Go to the Dishwasher software menu pressing and holding
1 Soft
2. You are currently in Light Control Menu (please refer to
NaturalDry functionality could be disabled by the user as follows:
button (3 sec).
button (6 sec).
OPERATION INDICATOR description), if you don't want to
2 Medium
• Press button ÉCO 50°
1. Go to the Dishwasher software menu pressing and holding
2. You are currently in Light Control Menu (please refer to
change anything please press and hold
Level WATER HARDNESS TABLE).
3 Average
button (6 sec).
Available AUTO 50°- 60°
OPERATION INDICATOR description), if you don't want to
the two letters appears on the display)
4 Hard
1 Soft
2. You are currently in Light Control Menu (please refer to
options change anything please press and hold
*)
3. You switched to NaturalDry Control Menu, you could change
INTENSIF 65°
5 Very hard
2 Medium
OPERATION INDICATOR description), if you don't want to
the two letters appears on the display)
status of NaturalDry functionality by pressing
change anything please press and hold
3 Average
3. You switched to NaturalDry Control Menu, you could change
Lavage rapide 30' 50° E
– enabled
• Switch off the appliance by pressing the ON/OFF button.
1
the two letters appears on the display)
status of NaturalDry functionality by pressing
Setting is complete! 4 Hard
To confirm the change and exit from the Control Menu please
2
Lavage et séchage rapide 50°
3. You switched to NaturalDry Control Menu, you could change
E
– enabled
press and hold
5 Very hard
3
status of NaturalDry functionality by pressing
FILLING THE RINSE AID DISPENSER
To confirm the change and exit from the Control Menu please
VERRE 45°
E
• Switch off the appliance by pressing the ON/OFF button. 4 – enabled
press and hold
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
Setting is complete!
Silence 50° (Programme
To confirm the change and exit from the Control Menu please
should be filled when the RINSE AID REFILL indicator light
5
nocturne)
in the control panel is lit.
press and hold
FILLING THE RINSE AID DISPENSER
• Switch off the appliance by pressing the ON/OFF button.
-
STÉRILISATION 65°
Setting is complete!
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
should be filled when the RINSE AID REFILL indicator light
PRÉLAVAGE
FILLING THE RINSE AID DISPENSER
in the control panel is lit.
-
11
Rinse aid makes dish DRYING easier. The rinse aid dispenser A Auto-nettoyage 65°
should be filled when the RINSE AID REFILL indicator light
* selon les paramètres
11
in the control panel is lit.
-
11
1. Open the dispenser B by pressing and pulling up the tab on
the lid.
-
2. Carefully introduce the rinse aid as far as the maximum
(110 ml) reference notch of the filling space - avoid spilling it.
If this happens, clean the spill immediately with a dry cloth.
1. Open the dispenser B by pressing and pulling up the tab on
-
3. Press the lid down until you hear a click to close it.
the lid.
NEVER pour the rinse aid directly into the tub.
2. Carefully introduce the rinse aid as far as the maximum
TABLET (Tab)
EN
This setting allows you to optimize the performance of
TABLET (Tab)
the program according to the type of detergent used.
This setting allows you to optimize the performance of
Press the START/PAUSE button for 3 seconds (the
the program according to the type of detergent used.
corresponding symbol will light up) if you use combined
Press the START/PAUSE button for 3 seconds (the
detergents in tablet form (rinse aid, salt and detergent in
corresponding symbol will light up) if you use combined
1 dose).
detergents in tablet form (rinse aid, salt and detergent in
If you use powder or liquid detergent, this option
1 dose).
should be off.
If you use powder or liquid detergent, this option
should be off.
OPERATION INDICATOR
A LED light projected on the floor indicates that the
OPERATION INDICATOR
dishwasher is working. One of the following operating
ENGLISH
A LED light projected on the floor indicates that the
modes can be selected:
dishwasher is working. One of the following operating
a) Disabled function.
modes can be selected:
b) When the cycle starts the light goes on for few seconds,
a) Disabled function.
stays off during the cycle and flashes at the end of the
Make sure the cap is screwed on tightly, so that no detergent can
b) When the cycle starts the light goes on for few seconds,
get into the container during the wash program (this could damage
cycle.
the water softener beyond repair).
stays off during the cycle and flashes at the end of the
c) The light stays on during the cycle and flashes at the
As soon as this procedure is complete, run a program without
cycle.
end of the cycle (default mode).
loading. The "Pre-Wash" program alone is NOT
stays off during the cycle and flashes at the end of the
c) The light stays on during the cycle and flashes at the
If the delayed start was set, the light goes on either for the
Residual saline solution or grains of salt can lead to corrosion,
cycle.
end of the cycle (default mode).
irreparably damaging the stainless steel components.
first few seconds or the entire duration of the countdown,
The guarantee is not applicable if faults are caused by such
If the delayed start was set, the light goes on either for the
based on whether mode b) or c) was set.
end of the cycle (default mode). circumstances.
first few seconds or the entire duration of the countdown,
The light goes off every time the door is opened. To select
based on whether mode b) or c) was set.
the mode you prefer, switch on the machine, hold down
The light goes off every time the door is opened. To select
button P until one of the three letters appears on the display, heating element may be damaged as a result.
the mode you prefer, switch on the machine, hold down
Whenever you need to add salt, it is mandatory to complete
press button P until you reach the desired letter (or mode),
the procedure before the beginning of the washing cycle.
button P until one of the three letters appears on the display,
hold down button P to confirm the selection.
press button P until you reach the desired letter (or mode), button (until one of
Note: If NaturalDry is active and it opens the door, then
SETTING THE WATER HARDNESS
hold down button P to confirm the selection.
Operation Indicator will not flash at the end of cycle.
To allow the water softener to work in a perfect way, it is essential
button:
Note: If NaturalDry is active and it opens the door, then
that the water hardness setting is based on the actual water hard-
d
– disabled
ness in your house. This information can be obtained from your local
Operation Indicator will not flash at the end of cycle.
water supplier. The factory setting is for average (3) water hardness.
button (3 sec).
• Switch on the appliance by pressing the ON/OFF button.
• Switch off the appliance by pressing the ON/OFF button.
et maintenez-le enfoncé
• Hold down button for 5 seconds, until you hear a beep.
• Switch on the appliance by pressing the ON/OFF button.
et maintenez-le enfoncé pendant 6 secondes
• The current selection level number and the salt indicator light
for 5 seconds, until you hear a beep.
• Press button to select the desired hardness level (see
WATER HARDNESS TABLE).
d
– disabled
to select the desired hardness level (see
:
for 5 seconds, until you hear a beep.
Water Hardness Table
button (until one of
Level
button (3 sec).
Water Hardness Table
et maintenez-le enfoncé (3 sec).
for 5 seconds, until you hear a beep.
°dH
1 Soft
to select the desired hardness level (see
button:
German degrees French degrees
2 Medium
OUVERTURE DE LA PORTE
0 - 6
3 Average
Water Hardness Table
7 - 11
to select the desired hardness level (see
4 Hard
Duration of
°dH
12 - 17
German degrees
5 Very hard
wash pro-
Water Hardness Table
consumption
18 - 34
0 - 6
gram
• Switch off the appliance by pressing the ON/OFF button.
°dH (litres/cycle)
35 - 50
7 - 11
Level
(h:min)
**)
Setting is complete!
German degrees
12 - 17
d
– disabled
Soft 0 - 6
FILLING THE RINSE AID DISPENSER
18 - 34
2:45
Medium 7 - 11
d
– disabled
button (3 sec).
Rinse aid makes dish DRYING easier. The rinse aid dispenser A 35 - 50
Average 12 - 17
should be filled when the RINSE AID REFILL indicator light
d
Hard – disabled 18 - 34
in the control panel is lit. button (3 sec).
2:00
Very hard 35 - 50
button (3 sec).
2:30
0:55
B
1. Open the dispenser B by pressing and pulling up the tab on
1:40 A
the lid.
B
2. Carefully introduce the rinse aid as far as the maximum
(110 ml) reference notch of the filling space - avoid spilling it.
0:10
If this happens, clean the spill immediately with a dry cloth.
3. Press the lid down until you hear a click to close it.
B
NEVER pour the rinse aid directly into the tub.
0:50
B
EN
40
ADJUSTING THE D
9
If you are not complete
adjust the quantity of r
• Switch the dishwas
• Switch it off using th
ADJUSTING THE
• Press button
If you are not comple
• Switch it on using th
adjust the quantity of
• The current selection
• Switch the dishwa
ADJUSTING
• Press button
• Switch it off using
If you are not
s. supplied.
• Press button
adjust the qu
• Switch it off using th
• Switch it on using
• Switch the
Setting is complete!
• The current selectio
• Switch it o
If the rinse aid level is • Press button
• Press butt
s. supplied. The LOW RI supplied.
• Switch it o
run out of rinse aid. A m • Switch it off using
• The curren
the dishwasher model. Setting is complete!
• Press butt
please follow instructio
If the rinse aid level is s. supplied.
• If you see bluish stre
supplied. The LOW R • Switch it o
• If there are drops o
run out of rinse aid. A Setting is com
set a high number (
the dishwasher mode
If the rinse ai
please follow instructi
supplied. The
• If you see bluish st
run out of rins
FILLING THE DETE
• If there are drops o
the dishwash
set a high number
please follow
dishwashers.
• If you see
button:
To achieve the best wa
• If there are
FILLING THE DET
useof detergent, rinse
set a high
We recommend using
°dH °fH
or chlorine, as these p
dishwashers.
German degrees Good washing results French degrees
FILLING TH
To achieve the best w
detergent being used.
°fH
0 - 6 0 - 10
useof detergent, rinse
Exceeding the stated a We recommend using
7 - 11 11 - 20 dishwashers
wash and increases e or chlorine, as these
0 - 10
To achieve th
12 - 17 21 - 30
The amount can be ad Good washing results
useof deterge
11 - 20
après 165 min
18 - 34 normally soiled items, detergent being used 31 - 60
°fH
We recomme
button (until one of
Water Energy
21 - 30
detergent) or 35ml (liq
French degrees
Exceeding the stated or chlorine, a
35 - 50 61 - 90
80-170 min*
detergent directly insid
consumption
31 - 60
wash and increases e Good washin
0 - 10
button (until one of
will be enough.
fin de cycle The amount can be a detergent be
°fH (kWh/cycle)
61 - 90
11 - 20
If the crockery is only
button:
normally soiled items
French degrees
Exceeding th
button (until one of
water before being pla
21 - 30
N/A
detergent) or 35ml (li
wash and inc
0 - 10
of detergent used acco
button: detergent directly ins
31 - 60
12.0 0.92 The amount
11 - 20
fin de cycle powder/gel putted insi
will be enough.
normally soile
61 - 90
21 - 30 If the crockery is only
button:
detergent) or
fin de cycle
water before being pl
detergent dir
31 - 60
15.0 1.35
of detergent used acc
will be enoug
fin de cycle
61 - 90
powder/gel putted ins
If the crocker
water before
B
15.0 1.50
of detergent
N/A
A
powder/gel p
N/A
11.5 1.10
B
N/A
A
A
1. When measuring o
11.5 1.30 B
lier information to a
A
B there are indicati
2. Remove detergent
4.5 0.01
and close the cove
1. When measuring
A
3. Close the lid of the
lier information to
the closing device
B there are indica
8.0 0.80
2. Remove detergen
1. When me
The detergent dispen
A
and close the cov
A
If
ad
•
•
•
•
•
thre
•
s.
•
to s
Se
thr
If
su
ru
to
th
pl
•
•
FI
di
To
us
W
or
G
de
Ex
wa
Th
no
de
de
wi
If
wa
of
po
1
2
3
T
a
re
p
lier inform