IKEA FINPUTSAD Manual page 58

OPTIONS AND FUNCTIONS
OPTIONS AND FUNCTIONS
ITALIANO
OPTIONS AND FUNCTIONS
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
Funzioni
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
and beeps will sound. The option will not be enabled.
OPTIONS AND FUNCTIONS
LAVAGGIO FLESSIBILE
FLEXI WASH
FLEXI WASH
Nel caso in cui i piatti da lavare siano pochi, per
FLEXI WASH
If there are not many dishes to be washed, a half loading
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
If there are not many dishes to be washed, a half loading
limitare il consumo di acqua, elettricità e detersivo si
may be used in order to save water, electricity and
If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and
può utilizzare il programma Mezzo carico.
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
detergent.
may be used in order to save water, electricity and
and beeps will sound. The option will not be enabled.
detergent.
Selezionare il programma richiesto e quindi premere
Select the program and then press the FLEXI WASH button:
detergent.
il tasto LAVAGGIO FLESSIBILE: sul display compare il
Select the program and then press the FLEXI WASH button:
FLEXI WASH
the symbol of the chosen rack will appear on the display.
simbolo del cestello prescelto.
Select the program and then press the FLEXI WASH button:
the symbol of the chosen rack will appear on the display.
If there are not many dishes to be washed, a half loading
By default the appliance washes dishes in all racks.
Come sua impostazione predefinita, l'apparecchio
the symbol of the chosen rack will appear on the display.
By default the appliance washes dishes in all racks.
may be used in order to save water, electricity and
esegue il lavaggio in tutti i cestelli.
detergent. To wash only the specific rack, press this button repeatedly:
By default the appliance washes dishes in all racks.
To wash only the specific rack, press this button repeatedly:
Select the program and then press the FLEXI WASH button:
Per il lavaggio esclusivamente di un cestello in
The machine will switch off automatically during certain
To wash only the specific rack, press this button repeatedly:
shown on the display (only lower rack)
the symbol of the chosen rack will appear on the display.
shown on the display (only lower rack)
particolare, premere ripetutamente il tasto in
extended periods of inactivity, in order to minimise electri-
By default the appliance washes dishes in all racks.
shown on the display (only lower rack)
questione:
To wash only the specific rack, press this button repeatedly:
city consumption. If the crockery is only lightly soiled or
shown on the display (only upper rack)
indicazione sul display (solo cestello inferiore)
shown on the display (only lower rack) shown on the display (only upper rack)
if it has been rinsed with water before being placed in the
shown on the display (only upper rack)
dishwasher, reduce the amount of detergent used accordingly.
shown on the display (only upper rack) indicazione sul display (solo cestello superiore)
shown on the display (only cutlery rack)
shown on the display (only cutlery rack)
MODIFYING A RUNNING PROGRAM
shown on the display (only cutlery rack)
shown on the display (only cutlery rack) indicazione sul display (solo cestello portaposate)
If a wrong program was selected, it is possible to change it, pro-
shown on the display (option is OFF and the appliance will
shown on the display (option is OFF and the appliance will
shown on the display (option is OFF and the appliance will
vided that it has only just begun: open the door, press and hold indicazione sul display (l'opzione è impostata su
wash dishes in all racks).
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
wash dishes in all racks).
Spegnimento e l'apparecchio esegue il lavaggio per
the ON/OFF button, the machine will switch off.
ENGLISH
wash dishes in all racks).
Remember to load the upper or lower rack only, and to
Remember to load the upper or lower rack only, and to
Remember to load the upper or lower rack only, and to
tutti i cestelli).
Switch the machine back on using the ON/OFF button and select
reduce the amount of detergent accordingly.
reduce the amount of detergent accordingly.
Remember to load the upper or lower rack only, and to
reduce the amount of detergent accordingly.
If upper rack is removed, please apply detergent
the new wash cycle and any desired options; Start the wash cycle
If upper rack is removed, please apply detergent
reduce the amount of detergent accordingly.
directly to tub instead of detergent dispenser.
If upper rack is removed, please apply detergent
Ricordarsi di riempire soltanto i cestelli superiore e inferiore e
by pressing START/Pause button and closing the door within 4 sec.
directly to tub instead of detergent dispenser.
If upper rack is removed, please apply detergent
directly to tub instead of detergent dispenser.
di ridurre conseguentemente la dose di detersivo. Se il cestello
DELAY
directly to tub instead of detergent dispenser.
superiore viene rimosso, introdurre il detersivo direttamente
ADDING EXTRA CROCKERY
The start time of the program may be delayed for a period
nell'apparecchio anziché nell'apposita vaschetta.
DELAY
of time between 1 and 12 hours.
DELAY
Without switching off the machine, open the door (START/Pause
DELAY
1. Press the DELAY button: the corresponding «h» symbol
AVVIO RITARDATO
DELAY
The start time of the program may be delayed for a period
led starts blinking) (be ware of HOT steam!) and place the
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
È possibile ritardare l'avvio del programma per un
The start time of the program may be delayed for a period
the time (1h, 2h, etc. up to max. 12h) from the start of of time between 1 and 12 hours.
crockery inside the dishwasher. Press the START/Pause button
The start time of the program may be delayed for a period
of time between 1 and 12 hours.
tempo compreso tra 1 e 12 ore.
of time between 1 and 12 hours.
the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
and close the door within 4 sec., the cycle will resume from the
of time between 1 and 12 hours.
1. Press the DELAY button: the corresponding «h» symbol
1. Premere il tasto AVVIO RITARDATO: sul display
2. Select the wash program, press the START/PAUSE
1. Press the DELAY button: the corresponding «h» symbol
appears on the display; each time you press the button,
1. Press the DELAY button: the corresponding «h» symbol
point at which it was interrupted. button and within 4 seconds close the door: the timer appears on the display; each time you press the button,
appare il simbolo "h" corrispondente; a ogni
will begin counting down. appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of
appears on the display; each time you press the button,
pressione del tasto aumenta l'intervallo di tempo (1 the time (1h, 2h, etc. up to max. 12h) from the start of
3. Once this time has elapsed, the indicator light «h»
the time (1h, 2h, etc. up to max. 12h) from the start of
the selected wash cycle will be increased.
the time (1h, 2h, etc. up to max. 12h) from the start of
h, 2 h, ecc. fino a un massimo di 12 h) tra il momento
ACCIDENTAL INTERRUPTIONS the selected wash cycle will be increased.
switches off and the wash cycle begins.
the selected wash cycle will be increased.
2. Select the wash program, press the START/PAUSE
To adjust the delay time and select a shorter period of time, in cui i seleziona il programma e l'avvio del ciclo di
the selected wash cycle will be increased.
2. Select the wash program, press the START/PAUSE
If the door is opened during the wash cycle, or if there is a power
press the DELAY button. To cancel it, press the button
2. Select the wash program, press the START/PAUSE
button and within 4 seconds close the door: the timer lavaggio selezionato.
2. Select the wash program, press the START/PAUSE
button and within 4 seconds close the door: the timer
cut, the cycle stops. Press the START/Pause button and close
repeatedly until the selected delayed start indicator light
button and within 4 seconds close the door: the timer
2. Selezionare il programma di lavaggio, premere
will begin counting down.
button and within 4 seconds close the door: the timer
will begin counting down.
«h» switches off.
the door within 4 sec., the cycle will resume from the point at
il tasto AVVIO/PAUSA e chiudere la porta entro 4
will begin counting down.
3. Once this time has elapsed, the indicator light «h»
will begin counting down.
The DELAY function cannot be set once a wash cycle
3. Once this time has elapsed, the indicator light «h»
which it was interrupted.
secondi: Il timer inizia il conto alla rovescia.
has been started. 3. Once this time has elapsed, the indicator light «h»
switches off and the wash cycle begins.
3. Once this time has elapsed, the indicator light «h»
switches off and the wash cycle begins.
3. Una volta trascorso il tempo impostato, l'indicatore
switches off and the wash cycle begins.
To adjust the delay time and select a shorter period of time,
switches off and the wash cycle begins.
To adjust the delay time and select a shorter period of time,
"h" si spegne e inizia il ciclo di lavaggio. Per regolare
SHORT TIME
To adjust the delay time and select a shorter period of time,
press the DELAY button. To cancel it, press the button
To adjust the delay time and select a shorter period of time,
press the DELAY button. To cancel it, press the button
il tempo di avvio ritardato e selezionare un intervallo
This option can be used to reduce the duration of the main
press the DELAY button. To cancel it, press the button
repeatedly until the selected delayed start indicator light
press the DELAY button. To cancel it, press the button
repeatedly until the selected delayed start indicator light
programs while maintaining the same washing and drying
di tempo inferiore a quello impostato, premere il
repeatedly until the selected delayed start indicator light
«h» switches off.
performance levels.
repeatedly until the selected delayed start indicator light
«h» switches off.
tasto AVVIO RITARDATO. Per annullare l'impostazione,
After selecting the program, press the SHORT TIME button
«h» switches off.
«h» switches off.
The DELAY function cannot be set once a wash cycle
premere ripetutamente il tasto fino allo spegnimento
The DELAY function cannot be set once a wash cycle
and the indicator light will switch on. To deselect the option,
The DELAY function cannot be set once a wash cycle
press the same button again. has been started. dell'indicatore "h".
The DELAY function cannot be set once a wash cycle
has been started.
has been started.
Una volta avviato il ciclo di lavaggio, non è più
has been started.
EXTRA DRY
possibile impostare la funzione di avvio ritardato
To improve the drying of the dishes, after selecting the
SHORT TIME
SHORT TIME
RAPIDO
program, press the EXTRA DRY button and the indicator
SHORT TIME
This option can be used to reduce the duration of the main
light comes on.
This option can be used to reduce the duration of the main L'opzione consente di ridurre la durata dei principali
A higher temperature during the final rinse and an extended
programs while maintaining the same washing and drying
This option can be used to reduce the duration of the main programmi ma di mantenere la stessa qualità nelle
programs while maintaining the same washing and drying
drying phase allow for improving drying. To deselect the
performance levels.
programs while maintaining the same washing and drying prestazioni di lavaggio e asciugatura. Dopo aver
performance levels.
option, press the same button again. The EXTRA DRY
After selecting the program, press the SHORT TIME button selezionato il programma, premere il tasto RAPIDO:
option results in the lengthening of the wash cycle. Program
performance levels.
After selecting the program, press the SHORT TIME button
la spia corrispondente si illumina. Per deselezionare
and the indicator light will switch on. To deselect the option,
After selecting the program, press the SHORT TIME button
and the indicator light will switch on. To deselect the option,
l'opzione in questione premere nuovamente lo stesso
press the same button again.
and the indicator light will switch on. To deselect the option,
press the same button again.
tasto.
press the same button again.
Eco
1
EXTRA DRY
EXTRA DRY
EXTRA DRY
Per migliorare l'asciugatura dei piatti, dopo aver
EXTRA DRY
To improve the drying of the dishes, after selecting the
To improve the drying of the dishes, after selecting the
selezionato il programma richiesto premere il tasto
Conventional
program, press the EXTRA DRY button and the indicator
To improve the drying of the dishes, after selecting the
2 program, press the EXTRA DRY button and the indicator
EXTRA DRY: la corrispondente spia si illumina. Una
wash and dry
light comes on.
program, press the EXTRA DRY button and the indicator
light comes on.
temperatura superiore durante il risciacquo finale e
A higher temperature during the final rinse and an extended
light comes on.
A higher temperature during the final rinse and an extended
la maggiore durata del programma consentono una
drying phase allow for improving drying. To deselect the Intensive
3
A higher temperature during the final rinse and an extended
drying phase allow for improving drying. To deselect the migliore asciugatura. Per deselezionare l'opzione
option, press the same button again. The EXTRA DRY
drying phase allow for improving drying. To deselect the in questione premere nuovamente lo stesso tasto.
option, press the same button again. The EXTRA DRY
option results in the lengthening of the wash cycle.
L'opzione EXTRA DRY comporta una maggior durata
option, press the same button again. The EXTRA DRY
option results in the lengthening of the wash cycle.
Fast
4
del ciclo di lavaggio.
option results in the lengthening of the wash cycle.
TABLET (Tab)
Pastiglia
Questa impostazione permette di ottimizzare le
This setting allows you to optimize the performance of
Sanitizing
5
prestazioni del programma in base al tipo di detersivo
the program according to the type of detergent used.
usato.
Press the START/PAUSE button for 3 seconds (the
Pre-Wash
6
corresponding symbol will light up) if you use combined
detergents in tablet form (rinse aid, salt and detergent in
FLEXI WASH
If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and
detergent.
Select the program and then press the FLEXI WASH button:
the symbol of the chosen rack will appear on the display.
By default the appliance washes dishes in all racks.
To wash only the specific rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
Remember to load the upper or lower rack only, and to
reduce the amount of detergent accordingly.
If upper rack is removed, please apply detergent
directly to tub instead of detergent dispenser.
DELAY
The start time of the program may be delayed for a period
of time between 1 and 12 hours.
1. Press the DELAY button: the corresponding «h» symbol
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of
the selected wash cycle will be increased.
2. Select the wash program, press the START/PAUSE
button and within 4 seconds close the door: the timer
will begin counting down.
3. Once this time has elapsed, the indicator light «h»
switches off and the wash cycle begins.
To adjust the delay time and select a shorter period of time,
press the DELAY button. To cancel it, press the button
repeatedly until the selected delayed start indicator light
«h» switches off.
The DELAY function cannot be set once a wash cycle
has been started.
SHORT TIME
This option can be used to reduce the duration of the main
NaturalDry
programs while maintaining the same washing and drying
NaturalDry is a convection drying system which automatically
performance levels.
opens the door during/after drying phase to ensure exceptional
After selecting the program, press the SHORT TIME button
drying performance every day. Door opens at the temperature
and the indicator light will switch on. To deselect the option,
that is safe to your kitchen furniture, thus door will not be opened
press the same button again.
when the option of SHORT TIME is on.
As additional steam protection, special designed protection foil is
EXTRA DRY
added together with the dishwasher. To see how to mount protec-
To improve the drying of the dishes, after selecting the
tion foil please refer to (INSTALLATION GUIDE).
program, press the EXTRA DRY button and the indicator
NaturalDry functionality could be disabled by the user as follows:
light comes on.
1. Go to the Dishwasher software menu pressing and holding
A higher temperature during the final rinse and an extended
button (6 sec).
drying phase allow for improving drying. To deselect the
2. You are currently in Light Control Menu (please refer to
option, press the same button again. The EXTRA DRY
OPERATION INDICATOR description), if you don't want to
option results in the lengthening of the wash cycle.
change anything please press and hold
the two letters appears on the display)
3. You switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing
E
To confirm the change and exit from the Control Menu please
press and hold
11
50°
55°
65°
rapidly 3 times
-
50°
65°
-
-
TABLET (Tab)
This setting allows you to optimize the performance of
Premere il tasto AVVIO/PAUSA per 3 secondi (la
TABLET (Tab)
the program according to the type of detergent used.
Press the START/PAUSE button for 3 seconds (the
spia corrispondente si accenderà) se si utilizza un
This setting allows you to optimize the performance of
corresponding symbol will light up) if you use combined
detersivo combinato in pastiglie (brillantante, sale e
detergents in tablet form (rinse aid, salt and detergent in
the program according to the type of detergent used.
detersivo in un'unica dose).
1 dose).
Press the START/PAUSE button for 3 seconds (the
If you use powder or liquid detergent, this option
Se si utilizza un detersivo in polvere o in forma
should be off.
ENGLISH
corresponding symbol will light up) if you use combined
liquida, questa opzione deve essere disattivata.
TABLET (Tab)
detergents in tablet form (rinse aid, salt and detergent in
SPIA DI FUNZIONAMENTO
This setting allows you to optimize the performance of
OPERATION INDICATOR
1 dose).
the program according to the type of detergent used.
La luce di un LED proiettata sul pavimento segnala
A LED light projected on the floor indicates that the
Press the START/PAUSE button for 3 seconds (the If you use powder or liquid detergent, this option
dishwasher is working. One of the following operating che la lavastoviglie è in funzione. È possibile
Make sure the cap is screwed on tightly, so that no detergent can
corresponding symbol will light up) if you use combined
modes can be selected:
should be off.
selezionare una delle seguenti modalità di
get into the container during the wash program (this could damage
detergents in tablet form (rinse aid, salt and detergent in
a) Disabled function.
the water softener beyond repair).
funzionamento:
1 dose).
b) When the cycle starts the light goes on for few seconds,
If you use powder or liquid detergent, this option As soon as this procedure is complete, run a program without
stays off during the cycle and flashes at the end of the a) Funzione disattivata.
should be off.
OPERATION INDICATOR
loading. The "Pre-Wash" program alone is NOT cycle.
b) All'avvio del ciclo di lavaggio la spia si accende per
c) The light stays on during the cycle and flashes at the
Residual saline solution or grains of salt can lead to corrosion,
pochi secondi, rimane spenta per tutta la durata del
A LED light projected on the floor indicates that the
end of the cycle (default mode).
irreparably damaging the stainless steel components.
OPERATION INDICATOR
If the delayed start was set, the light goes on either for the
ciclo e lampeggia alla sua conclusione.
dishwasher is working. One of the following operating
The guarantee is not applicable if faults are caused by such
first few seconds or the entire duration of the countdown,
A LED light projected on the floor indicates that the
c) La spia rimane accesa durante il ciclo di lavaggio e
circumstances. modes can be selected:
based on whether mode b) or c) was set.
dishwasher is working. One of the following operating
lampeggia alla sua conclusione (modalità predefinita).
The light goes off every time the door is opened. To select
modes can be selected: a) Disabled function.
the mode you prefer, switch on the machine, hold down
A seconda che sia stata impostata la modalità b)
a) Disabled function.
b) When the cycle starts the light goes on for few seconds,
button P until one of the three letters appears on the display,
b) When the cycle starts the light goes on for few seconds,
heating element may be damaged as a result.
oppure c), in caso di impostazione del programma
press button P until you reach the desired letter (or mode),
stays off during the cycle and flashes at the end of the
Whenever you need to add salt, it is mandatory to complete
di avvio ritardato la spia si illumina rispettivamente
hold down button P to confirm the selection.
cycle.
the procedure before the beginning of the washing cycle.
Note: If NaturalDry is active and it opens the door, then
per pochi secondi e per l'intera durata del conto
c) The light stays on during the cycle and flashes at the
Operation Indicator will not flash at the end of cycle. c) The light stays on during the cycle and flashes at the
alla rovescia. La spia si spegne a ogni apertura della
end of the cycle (default mode).
SETTING THE WATER HARDNESS
If the delayed start was set, the light goes on either for the
porta.
To allow the water softener to work in a perfect way, it is essential
first few seconds or the entire duration of the countdown,
ENGLISH
If the delayed start was set, the light goes on either for the
Per selezionare la modalità richiesta, azionare
that the water hardness setting is based on the actual water hard-
NaturalDry
based on whether mode b) or c) was set.
first few seconds or the entire duration of the countdown,
la macchina e tenere premuto il tasto
ness in your house. This information can be obtained from your local
The light goes off every time the door is opened. To select
NaturalDry is a convection drying system which automatically
the mode you prefer, switch on the machine, hold down water supplier. The factory setting is for average (3) water hardness. opens the door during/after drying phase to ensure exceptional based on whether mode b) or c) was set.
a visualizzare tre lettere sul display: premere
drying performance every day. Door opens at the temperature
button P until one of the three letters appears on the display,
ripetutamente il tasto
The light goes off every time the door is opened. To select
• Switch on the appliance by pressing the ON/OFF button.
that is safe to your kitchen furniture, thus door will not be opened Make sure the cap is screwed on tightly, so that no detergent can
press button P until you reach the desired letter (or mode),
(o la modalità) richiesta, quindi tenere premuto il
when the option of SHORT TIME is on.
the mode you prefer, switch on the machine, hold down
• Switch off the appliance by pressing the ON/OFF button.
hold down button P to confirm the selection. get into the container during the wash program (this could damage
As additional steam protection, special designed protection foil is
tasto
Note: If NaturalDry is active and it opens the door, then
• Hold down button
the water softener beyond repair). button P until one of the three letters appears on the display,
NaturalDry
added together with the dishwasher. To see how to mount protec-
ENGLISH
Operation Indicator will not flash at the end of cycle.
• Switch on the appliance by pressing the ON/OFF button. Nota: Se la funzione NaturalDry è attiva e apre la porta,
As soon as this procedure is complete, run a program without
tion foil please refer to (INSTALLATION GUIDE). press button P until you reach the desired letter (or mode),
Door opening system NaturalDry is a convection drying system
• The current selection level number and the salt indicator light
NaturalDry functionality could be disabled by the user as follows: loading. The "Pre-Wash" program alone is NOT
la spia di funzionamento non lampeggerà alla fine del
hold down button P to confirm the selection.
1. Go to the Dishwasher software menu pressing and holding
Residual saline solution or grains of salt can lead to corrosion,
which automatically opens the door during/after drying phase to
ciclo.
button (6 sec).
Note: If NaturalDry is active and it opens the door, then
• Press button
irreparably damaging the stainless steel components.
ensure exceptional drying performance every day. Door opens at
2. You are currently in Light Control Menu (please refer to
NATURALDRY
Make sure the cap is screwed on tightly, so that no detergent can
WATER HARDNESS TABLE). Operation Indicator will not flash at the end of cycle.
The guarantee is not applicable if faults are caused by such
OPERATION INDICATOR description), if you don't want to
the temperature that is safe to your kitchen furniture.
Il sistema NaturalDry è una funzione di asciugatura a get into the container during the wash program (this could damage
circumstances.
change anything please press and hold
As additional steam protection, special designed protection foil is
the water softener beyond repair).
convezione che apre automaticamente la porta durante/dopo the two letters appears on the display)
3. You switched to NaturalDry Control Menu, you could change As soon as this procedure is complete, run a program without
added together with the dishwasher. To see how to mount protec-
la fase di asciugatura per garantire stoviglie perfettamente
Level
status of NaturalDry functionality by pressing
loading. The "Pre-Wash" program alone is NOT
tion foil please refer to (INSTALLATION GUIDE). heating element may be damaged as a result.
asciutte dopo ogni lavaggio. La porta viene aperta quando la
NaturalDry E
– enabled
NaturalDry
Residual saline solution or grains of salt can lead to corrosion,
1 Whenever you need to add salt, it is mandatory to complete Soft
To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows:
temperatura è tale da non poter danneggiare i mobili della
NaturalDry
irreparably damaging the stainless steel components.
NaturalDry is a convection drying system which automatically
press and hold the procedure before the beginning of the washing cycle.
NaturalDry is a convection drying system which automatically
2 Medium
cucina. Come ulteriore protezione dal vapore, la lavastoviglie 1. Go to the Dishwasher software menu pressing and holding
The guarantee is not applicable if faults are caused by such
opens the door during/after drying phase to ensure exceptional
NaturalDry is a convection drying system which automatically
opens the door during/after drying phase to ensure exceptional
viene fornita con una speciale lamina di protezione aggiuntiva. button (6 sec).
3 Average
circumstances.
SETTING THE WATER HARDNESS
drying performance every day. Door opens at the temperature
opens the door during/after drying phase to ensure exceptional
drying performance every day. Door opens at the temperature
Per istruzioni sul montaggio della lamina protettiva, vedere le
2. You switched to NaturalDry Control Menu, you could change
To allow the water softener to work in a perfect way, it is essential
4 Hard
that is safe to your kitchen furniture, thus door will not be opened
drying performance every day. Door opens at the temperature
that is safe to your kitchen furniture, thus door will not be opened
(ISTRUZIONI DI MONTAGGIO).
that the water hardness setting is based on the actual water hard-
status of NaturalDry functionality by pressing
5 Very hard
when the option of SHORT TIME is on.
that is safe to your kitchen furniture, thus door will not be opened heating element may be damaged as a result.
when the option of SHORT TIME is on.
La funzione NaturalDry può essere disabilitata come segue: E ness in your house. This information can be obtained from your local
– enabled
As additional steam protection, special designed protection foil is Whenever you need to add salt, it is mandatory to complete
when the option of SHORT TIME is on. water supplier. The factory setting is for average (3) water hardness.
1. Accedere al menu della spia di funzionamento come As additional steam protection, special designed protection foil is
• Switch off the appliance by pressing the ON/OFF button. To confirm the change and exit from the Control Menu please
11
the procedure before the beginning of the washing cycle.
added together with the dishwasher. To see how to mount protec-
As additional steam protection, special designed protection foil is
nell'ultimo passaggio, premere a lungo added together with the dishwasher. To see how to mount protec- FILLING THE RINSE AID DISPENSER
Setting is complete!
press and hold • Switch on the appliance by pressing the ON/OFF button.
tion foil please refer to (INSTALLATION GUIDE).
compare il menu.
added together with the dishwasher. To see how to mount protec-
tion foil please refer to (INSTALLATION GUIDE).
• Switch off the appliance by pressing the ON/OFF button.
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
d SETTING THE WATER HARDNESS
– enabled – disabled
NaturalDry functionality could be disabled by the user as follows:
2. Premere nuovamente
FILLING THE RINSE AID DISPENSER tion foil please refer to (INSTALLATION GUIDE).
• Hold down button should be filled when the RINSE AID REFILL indicator light
NaturalDry functionality could be disabled by the user as follows:
To allow the water softener to work in a perfect way, it is essential
button (3 sec).
NaturalDry. 1. Go to the Dishwasher software menu pressing and holding • Switch on the appliance by pressing the ON/OFF button.
in the control panel is lit.
NaturalDry functionality could be disabled by the user as follows: that the water hardness setting is based on the actual water hard-
1. Go to the Dishwasher software menu pressing and holding
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
• The current selection level number and the salt indicator light
3. Accedendo al menu di controllo NaturalDry è possibile
button (6 sec).
ness in your house. This information can be obtained from your local
should be filled when the RINSE AID REFILL indicator light
1. Go to the Dishwasher software menu pressing and holding
button (6 sec).
water supplier. The factory setting is for average (3) water hardness.
cambiare lo stato della funzione premendo il tasto
in the control panel is lit. 2. You are currently in Light Control Menu (please refer to
button (6 sec).
2. You are currently in Light Control Menu (please refer to
• Press button
E – funzione abilitata d – funzione disabilitata
OPERATION INDICATOR description), if you don't want to
2. You are currently in Light Control Menu (please refer to
• Switch on the appliance by pressing the ON/OFF button.
OPERATION INDICATOR description), if you don't want to
WATER HARDNESS TABLE).
Available
Per confermare la modifica e uscire dal menu di controllo,
change anything please press and hold
• Switch off the appliance by pressing the ON/OFF button.
OPERATION INDICATOR description), if you don't want to
change anything please press and hold
options
*)
premere a lungo il tasto
• Hold down button
the two letters appears on the display)
change anything please press and hold
the two letters appears on the display)
• Switch on the appliance by pressing the ON/OFF button.
3. You switched to NaturalDry Control Menu, you could change
the two letters appears on the display)
3. You switched to NaturalDry Control Menu, you could change
• The current selection level number and the salt indicator light
status of NaturalDry functionality by pressing
3. You switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing
1
E
– enabled
status of NaturalDry functionality by pressing E
• Press button – enabled
1. Open the dispenser B by pressing and pulling up the tab on
2
To confirm the change and exit from the Control Menu please
E WATER HARDNESS TABLE).
– enabled
To confirm the change and exit from the Control Menu please AUTO 50°- 60°
3
press and hold
To confirm the change and exit from the Control Menu please
press and hold 2. Carefully introduce the rinse aid as far as the maximum
1. Open the dispenser B by pressing and pulling up the tab on
Intensivo 65°
4
press and hold
the lid.
Lavaggio veloce 30' 50°
2. Carefully introduce the rinse aid as far as the maximum
5
3. Press the lid down until you hear a click to close it.
(110 ml) reference notch of the filling space - avoid spilling it.
Lavaggio e asciugatura veloci 50°
1
NEVER pour the rinse aid directly into the tub.
-
• Switch off the appliance by pressing the ON/OFF button.
If this happens, clean the spill immediately with a dry cloth.
2
3. Press the lid down until you hear a click to close it. Setting is complete!
NEVER pour the rinse aid directly into the tub.
3
Silenzioso 50° (programma notte)
-
FILLING THE RINSE AID DISPENSER
4
Igienizzante 65°
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
5
11
11
should be filled when the RINSE AID REFILL indicator light
Prelavaggio
- 11
in the control panel is lit.
• Switch off the appliance by pressing the ON/OFF button.
Auto-pulizia 65°
Setting is complete!
* a seconda delle impostazioni
-
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
EN
TABLET (Tab)
ENGLISH
TABLET (Tab)
This setting allows you to optimize the performance of
This setting allows you to optimize the performance of ENGLISH
the program according to the type of detergent used.
the program according to the type of detergent used.
Press the START/PAUSE button for 3 seconds (the
Make sure the cap is screwed on tightly, so that no de
Press the START/PAUSE button for 3 seconds (the
corresponding symbol will light up) if you use combined
get into the container during the wash program (this co
corresponding symbol will light up) if you use combined
detergents in tablet form (rinse aid, salt and detergent in
the water softener beyond repair).
Make sure the cap is screwed on tightly, so that no detergent can
detergents in tablet form (rinse aid, salt and detergent in
As soon as this procedure is complete, run a program
1 dose).
get into the container during the wash program (this could damage
loading. The "Pre-Wash" program alone is NOT
1 dose).
the water softener beyond repair). If you use powder or liquid detergent, this option
Residual saline solution or grains of salt can lead to c
As soon as this procedure is complete, run a program without
If you use powder or liquid detergent, this option
should be off.
irreparably damaging the stainless steel components
loading. The "Pre-Wash" program alone is NOT
should be off.
The guarantee is not applicable if faults are caused b
Residual saline solution or grains of salt can lead to corrosion,
circumstances.
irreparably damaging the stainless steel components.
OPERATION INDICATOR
The guarantee is not applicable if faults are caused by such
OPERATION INDICATOR
circumstances.
A LED light projected on the floor indicates that the
heating element may be damaged as a result.
A LED light projected on the floor indicates that the
dishwasher is working. One of the following operating
Whenever you need to add salt, it is mandatory to
dishwasher is working. One of the following operating
modes can be selected:
the procedure before the beginning of the washin
heating element may be damaged as a result.
modes can be selected:
a) Disabled function.
Whenever you need to add salt, it is mandatory to complete
SETTING THE WATER HARDNESS
a) Disabled function.
b) When the cycle starts the light goes on for few seconds,
the procedure before the beginning of the washing cycle.
To allow the water softener to work in a perfect way, it is
stays off during the cycle and flashes at the end of the
b) When the cycle starts the light goes on for few seconds,
stays off during the cycle and flashes at the end of the
that the water hardness setting is based on the actual w
SETTING THE WATER HARDNESS
cycle.
stays off during the cycle and flashes at the end of the
cycle.
ness in your house. This information can be obtained fro
To allow the water softener to work in a perfect way, it is essential
ENGLISH
cycle.
c) The light stays on during the cycle and flashes at the
water supplier. The factory setting is for average (3) wat
that the water hardness setting is based on the actual water hard-
end of the cycle (default mode).
c) The light stays on during the cycle and flashes at the
end of the cycle (default mode).
ness in your house. This information can be obtained from your local
• Switch on the appliance by pressing the ON/OFF b
water supplier. The factory setting is for average (3) water hardness. end of the cycle (default mode).
If the delayed start was set, the light goes on either for the
• Switch off the appliance by pressing the ON/OFF b
If the delayed start was set, the light goes on either for the
first few seconds or the entire duration of the countdown, • Hold down button
• Switch on the appliance by pressing the ON/OFF button.
Make sure the cap is screwed on tightly, so that no detergen
• Switch on the appliance by pressing the ON/OFF b
first few seconds or the entire duration of the countdown,
based on whether mode b) or c) was set.
• Switch off the appliance by pressing the ON/OFF button.
get into the container during the wash program (this could da
ENGLISH
• The current selection level number and the salt ind
fino a selezionare la lettera
• Hold down button for 5 seconds, until you hear a beep.
based on whether mode b) or c) was set.
the water softener beyond repair).
The light goes off every time the door is opened. To select
• Switch on the appliance by pressing the ON/OFF button.
As soon as this procedure is complete, run a program witho
The light goes off every time the door is opened. To select
the mode you prefer, switch on the machine, hold down
• Press button
• The current selection level number and the salt indicator light
per confermare la selezione impostata. loading. The "Pre-Wash" program alone is NOT
for 5 seconds, until you hear a beep.
the mode you prefer, switch on the machine, hold down
button P until one of the three letters appears on the display,
WATER HARDNESS TABLE).
Residual saline solution or grains of salt can lead to corrosio
button P until one of the three letters appears on the display, Make sure the cap is screwed on tightly, so tha
press button P until you reach the desired letter (or mode),
Press button to select the desired hardness level (see
•
irreparably damaging the stainless steel components.
get into the container during the wash program (
press button P until you reach the desired letter (or mode),
WATER HARDNESS TABLE).
hold down button P to confirm the selection.
The guarantee is not applicable if faults are caused by such
the water softener beyond repair).
Level
circumstances.
hold down button P to confirm the selection.
to select the desired hardness level (see
Note: If NaturalDry is active and it opens the door, then
Water Hardness Table
As soon as this procedure is complete, run a pr
Note: If NaturalDry is active and it opens the door, then
Operation Indicator will not flash at the end of cycle.
loading. The "Pre-Wash" program alone is NOT
1
Level
button (until one of
Operation Indicator will not flash at the end of cycle.
Residual saline solution or grains of salt can lea
Water Hardness Table
German degrees
heating element may be damaged as a result. 2 Medium
irreparably damaging the stainless steel compo
1 Soft
Whenever you need to add salt, it is mandatory to comp °dH
3 Average
The guarantee is not applicable if faults are cau
button:
German degrees the procedure before the beginning of the washing cycl French degrees
2 Medium
d
– disabled circumstances.
4
0 - 6
3 Average
SETTING THE WATER HARDNESS
5 Very hard
button (3 sec).
7 - 11
To allow the water softener to work in a perfect way, it is essent
4 Hard
heating element may be damaged as a resul
that the water hardness setting is based on the actual water ha 12 - 17
• Switch off the appliance by pressing the ON/OFF bu
5 Very hard
Whenever you need to add salt, it is mandat
ness in your house. This information can be obtained from your
Setting is complete!
18 - 34
the procedure before the beginning of the w
water supplier. The factory setting is for average (3) water hard
• Switch off the appliance by pressing the ON/OFF button.
35 - 50
FILLING THE RINSE AID DISPENSER
d
Setting is complete!
– disabled
SETTING THE WATER HARDNESS
button (until one of • Switch on the appliance by pressing the ON/OFF button.
• Switch off the appliance by pressing the ON/OFF button.
Rinse aid makes dish DRYING easier. The rinse aid d To allow the water softener to work in a perfect wa
• Hold down button should be filled when the RINSE AID REFILL indicat that the water hardness setting is based on the ac
button (3 sec).
button:
• Switch on the appliance by pressing the ON/OFF button.
in the control panel is lit. ness in your house. This information can be obtai
• The current selection level number and the salt indicator
water supplier. The factory setting is for average (
per 6 secondi per accedere al menu
for 5 seconds, until you hear a beep.
• Switch on the appliance by pressing the ON/
• Press button to select the desired hardness level (see
• Switch off the appliance by pressing the ON/
WATER HARDNESS TABLE).
• Hold down button
Duration of
to select the desired hardness level (see
• Switch on the appliance by pressing the ON/
wash pro-
• The current selection level number and the s
consumption
Level
Water Hardness Table
gram
(3 sec).
for 5 seconds, until you hear a beep.
(litres/cycle)
• Press button
(h:min) 1 Soft °dH
**)
Level
WATER HARDNESS TABLE).
APERTURA PORTA
1. Open the dispenser B by pressing and pulling up th
German degrees
2 Medium
the lid.
Soft B 0 - 6
2:45
Eco 50°
d
3 – disabled Average
d
to select the desired hardness level (see – disabled
2. Carefully introduce the rinse aid as far as the maxim
Medium 7 - 11
d
4 – disabled (110 ml) reference notch of the filling space - avoid Hard
the lid.
B
Average 12 - 17
button (3 sec). If this happens, clean the spill immediately with a dr
button (3 sec).
5 Very hard
Water Hardness Table
1
2:00
3. Press the lid down until you hear a click to close it.
Hard 18 - 34
(110 ml) reference notch of the filling space - avoid spilling it.
button (3 sec).
°dH
2
NEVER pour the rinse aid directly into the tub.
Level
If this happens, clean the spill immediately with a dry cloth. • Switch off the appliance by pressing the ON/OFF button.
Very hard 35 - 50
German degrees
3
Setting is complete!
Soft 0 - 6
2:30
4
Medium 7 - 11
FILLING THE RINSE AID DISPENSER
Vetro 45°
5
Average 12 - 17
Rinse aid makes dish DRYING easier. The rinse aid dispens
0:55
should be filled when the RINSE AID REFILL indicator ligh
• Switch off the appliance by pressing the ON/O
Hard 18 - 34
in the control panel is lit.
Setting is complete!
Very hard 35 - 50
1:40
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse
should be filled when the RINSE AID REFILL in
0:10
in the control panel is lit.
EN
EN
EN
58
ADJUSTING THE D
If you are not complet
adjust the quantity of r
• Switch the dishwas
• Switch it off using t
• Press button
• Switch it on using t
• The current selection
• Press button
s. supplied.
• Switch it off using t
Setting is complete!
If the rinse aid level is
9
supplied. The LOW RI
run out of rinse aid. A m
the dishwasher model.
please follow instructio
• If you see bluish str
fino
for 5 seconds, until you hear a
• If there are drops o
set a high number (
ADJUSTIN
If you are no
FILLING THE DETE
to select the desired hardness leve
adjust the q
• Switch th
dishwashers.
Water Hardness Table
• Switch it
To achieve the best w
• Press bu
°dH
useof detergent, rinse
• Switch it
German degrees
We recommend using ADJUSTI
•
Soft °dH 0 - 6 °fH
or chlorine, as these p
If you are n
•
French degrees
Good washing results
7 - 11 adjust the q
s.
detergent being used.
0 - 6 0 - 10
°fH • Switch t
• Switch it
12 - 17
• Switch i
Exceeding the stated Setting is co
7 - 11 11 - 20
Hard 18 - 34
• Press b
wash and increases e
0 - 10
If the rinse a
12 - 17 21 - 30
• Switch i
The amount can be ad 35 - 50
supplied. Th
11 - 20
•
18 - 34 31 - 60
normally soiled items,
run out of rin
21 - 30 •
detergent) or 35ml (liq
35 - 50 61 - 90
the dishwas
s.
detergent directly insid
31 - 60
please follow
• Switch i
will be enough.
button:
• If you see
61 - 90
Setting is c
If the crockery is only
• If there a
water before being pla
If the rinse
of detergent used acc
supplied. T
finché non
for 5 seconds, until you hear a beep
powder/gel putted insi
run out of r
FILLING T
the dishwa
please follo
• If you se
dishwashe
• If there
To achieve
:
for 5 seconds, until you
useof deter
B
Water Hardness Table
Water Energy
We recomm
A
°dH
or chlorine,
button (until one of
consumption
button (until one of
FILLING
German degrees French degre
Good wash
button (until one of
(kWh/cycle)
to select the desired hardnes
detergent b
B
°fH 0 - 6
dishwashe
French degrees
Exceeding t
7 - 11
A
button:
button: To achieve
Water Hardness Table
wash and in
0 - 10
12.0 0.92
dopo 165 min
12 - 17 useof dete
button:
The amoun
1. When measuring o °dH
11 - 20
A We recomm
Level
18 - 34
80-170 min* normally so
lier information to a
German degrees
or chlorine
21 - 30
detergent) o
B there are indicat
35 - 50
Soft 0 - 6
Good wash
fine ciclo
15.0 1.35
detergent d
31 - 60
2. Remove detergent
detergent b
°fH
Medium 7 - 11
will be enou
N/A
and close the cove
61 - 90
French degrees
Exceeding
If the crocke
Average 12 - 17
3. Close the lid of the
fine ciclo wash and i
0 - 10
water befor
15.0 1.50
the closing device
Hard 18 - 34
The amoun
of detergen
11 - 20
fine ciclo
normally so
The detergent dispen
Very hard 35 - 50
powder/gel
21 - 30
detergent)
according to the prog
fine ciclo
11.5 1.10
detergent d
recommend using the
31 - 60
N/A
will be eno
program so that the b
61 - 90
achieved. If the crock
N/A
water befo
11.5 1.30
B
of detergen
N/A
powder/ge
A
4.5 0.01
EN
AD
If y
adj
• S
• S
• P
• S
• T
thre
• P
s. s
• S
to s
Set
If th
sup
run
the
ple
• I
• I
s
FIL
dis
To
use
We
or c
Frenc
Go
The curre
det
0
Press bu
Exc
1
supplied.
wa
2
The
3
nor
det
6
det
The curre
will
Press b
If th
supplied
wa
of d
pow
set a hig
B
A
set a hig
°fH
A
0 - 10
1.
11 - 20
21 - 30
31 - 60
2.
61 - 90
3.
Th
ac
rec
pro
ac