Funktionen - IKEA FINPUTSAD Manual

OPTIONS AND FUNCTIONS
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
DEUTSCH If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
and beeps will sound. The option will not be enabled.
FLEXI WASH
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times

Funktionen

FLEXI WASH
If there are not many dishes to be washed, a half loading
and beeps will sound. The option will not be enabled.
OPTIONS AND FUNCTIONS
may be used in order to save water, electricity and
If there are not many dishes to be washed, a half loading
detergent.
FLEXIBLES SPÜLEN
may be used in order to save water, electricity and
FLEXI WASH
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
Haben Sie nur wenig Geschirr zu spülen, wählen
Select the program and then press the FLEXI WASH button:
detergent.
If there are not many dishes to be washed, a half loading
Sie den Spülgang Halbe Füllung. Sie sparen Wasser,
the symbol of the chosen rack will appear on the display.
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
Select the program and then press the FLEXI WASH button:
may be used in order to save water, electricity and
Strom und Spülmittel.
and beeps will sound. The option will not be enabled.
By default the appliance washes dishes in all racks.
the symbol of the chosen rack will appear on the display.
The machine will switch off automatically during certain detergent.
Wählen Sie das Programm und drücken Sie dann
To wash only the specific rack, press this button repeatedly:
By default the appliance washes dishes in all racks.
FLEXI WASH
extended periods of inactivity, in order to minimise electri- Select the program and then press the FLEXI WASH button: die Taste FLEXIBLES SPÜLEN: das Symbol des
To wash only the specific rack, press this button repeatedly:
If there are not many dishes to be washed, a half loading
shown on the display (only lower rack)
ausgewählten Korbs erscheint auf dem Display.
city consumption. If the crockery is only lightly soiled or the symbol of the chosen rack will appear on the display.
may be used in order to save water, electricity and
Standardmäßig wäscht das Gerät das Geschirr in
shown on the display (only lower rack)
By default the appliance washes dishes in all racks.
if it has been rinsed with water before being placed in the
detergent.
allen Körben.
Select the program and then press the FLEXI WASH button:
To wash only the specific rack, press this button repeatedly:
shown on the display (only upper rack)
dishwasher, reduce the amount of detergent used accordingly.
Drücken Sie diese Taste wiederholt, um nur einen
the symbol of the chosen rack will appear on the display.
shown on the display (only upper rack)
shown on the display (only lower rack)
By default the appliance washes dishes in all racks.
bestimmten Korb zu spülen:
To wash only the specific rack, press this button repeatedly:
MODIFYING A RUNNING PROGRAM
shown on the display (only cutlery rack)
gezeigt auf dem Display (nur Unterkorb)
shown on the display (only lower rack)
If a wrong program was selected, it is possible to change it, pro-
shown on the display (only upper rack)
shown on the display (only cutlery rack)
vided that it has only just begun: open the door, press and hold
gezeigt auf dem Display (nur Oberkorb)
shown on the display (only upper rack)
shown on the display (option is OFF and the appliance will
the ON/OFF button, the machine will switch off.
wash dishes in all racks).
shown on the display (only cutlery rack) shown on the display (option is OFF and the appliance will
Switch the machine back on using the ON/OFF button and select
gezeigt auf dem Display (nur Besteckschublade)
shown on the display (only cutlery rack)
wash dishes in all racks).
Remember to load the upper or lower rack only, and to
the new wash cycle and any desired options; Start the wash cycle
ENGLISH
gezeigt auf dem Display (Option ist AUS und das
shown on the display (option is OFF and the appliance will reduce the amount of detergent accordingly.
by pressing START/Pause button and closing the door within 4 sec. Remember to load the upper or lower rack only, and to
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
Gerät wäscht Geschirr in allen Körben).
If upper rack is removed, please apply detergent
reduce the amount of detergent accordingly.
wash dishes in all racks).
Remember to load the upper or lower rack only, and to
directly to tub instead of detergent dispenser.
If upper rack is removed, please apply detergent
Denken Sie daran, nur den Ober- oder Unterkorb zu füllen, und ADDING EXTRA CROCKERY
reduce the amount of detergent accordingly.
Remember to load the upper or lower rack only, and to
If upper rack is removed, please apply detergent
die Menge an Spülmittel entsprechend zu reduzieren. Wenn der
directly to tub instead of detergent dispenser.
Without switching off the machine, open the door (START/Pause
reduce the amount of detergent accordingly.
directly to tub instead of detergent dispenser.
Oberkorb entfernt ist, das Spülmittel direkt in das Gerät geben
led starts blinking) (be ware of HOT steam!) and place the
DELAY
If upper rack is removed, please apply detergent
anstatt ins Spülmittelfach.
crockery inside the dishwasher. Press the START/Pause button
directly to tub instead of detergent dispenser.
DELAY DELAY
The start time of the program may be delayed for a period
DELAY
STARTZEITVORWAHL
and close the door within 4 sec., the cycle will resume from the
The start time of the program may be delayed for a period
of time between 1 and 12 hours.
The start time of the program may be delayed for a period
Der Programmstartzeit kann um eine Zeit von 1 bis 12
The start time of the program may be delayed for a period
of time between 1 and 12 hours.
point at which it was interrupted.
1. Press the DELAY button: the corresponding «h» symbol
of time between 1 and 12 hours.
DELAY Stunden verzögert werden.
1. Press the DELAY button: the corresponding «h» symbol
of time between 1 and 12 hours.
appears on the display; each time you press the button,
appears on the display; each time you press the button,
1. Drücken Sie die Taste STARTVERZÖGERUNG: Das
1. Press the DELAY button: the corresponding «h» symbol
The start time of the program may be delayed for a period
the time (1h, 2h, etc. up to max. 12h) from the start of
1. Press the DELAY button: the corresponding «h» symbol
ACCIDENTAL INTERRUPTIONS
entsprechende Symbol „h" erscheint auf dem Display;
the time (1h, 2h, etc. up to max. 12h) from the start of
appears on the display; each time you press the button,
the selected wash cycle will be increased.
of time between 1 and 12 hours.
appears on the display; each time you press the button,
bei jedem Drücken der Taste, erhöht sich die Zeit (1
the selected wash cycle will be increased.
If the door is opened during the wash cycle, or if there is a power
2. Select the wash program, press the START/PAUSE the time (1h, 2h, etc. up to max. 12h) from the start of
1. Press the DELAY button: the corresponding «h» symbol
Std., 2 Std., usw. bis zu max. 12 Std.) ab dem Start des the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
cut, the cycle stops. Press the START/Pause button and close 2. Select the wash program, press the START/PAUSE
the selected wash cycle will be increased.
appears on the display; each time you press the button,
will begin counting down. ausgewählten Spülprogramms.
the selected wash cycle will be increased.
button and within 4 seconds close the door: the timer
the door within 4 sec., the cycle will resume from the point at
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
the time (1h, 2h, etc. up to max. 12h) from the start of 2. Wählen Sie das Spülprogramm, drücken Sie die
2. Select the wash program, press the START/PAUSE
will begin counting down.
which it was interrupted. switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
Taste START/Pause-Taste und schließen Sie innerhalb
the selected wash cycle will be increased.
button and within 4 seconds close the door: the timer
To adjust the delay time and select a shorter period of time,
3. Once this time has elapsed, the indicator light «h»
will begin counting down.
von 4 Sekunden die Tür: die Zeitschaltuhr beginnt mit
press the DELAY button. To cancel it, press the button 2. Select the wash program, press the START/PAUSE
will begin counting down.
switches off and the wash cycle begins.
3. Once this time has elapsed, the indicator light «h» der Rückzählung.
repeatedly until the selected delayed start indicator light
button and within 4 seconds close the door: the timer
3. Once this time has elapsed, the indicator light «h»
«h» switches off.
To adjust the delay time and select a shorter period of time,
3. Nach Ablauf dieser Zeit, schaltet sich das
switches off and the wash cycle begins.
will begin counting down.
switches off and the wash cycle begins.
The DELAY function cannot be set once a wash cycle
Anzeigelicht „h" aus und das Programm beginnt
press the DELAY button. To cancel it, press the button
To adjust the delay time and select a shorter period of time,
3. Once this time has elapsed, the indicator light «h»
has been started.
To adjust the delay time and select a shorter period of time,
automatisch. Um die Startverzögerung anzupassen
repeatedly until the selected delayed start indicator light
press the DELAY button. To cancel it, press the button
switches off and the wash cycle begins.
press the DELAY button. To cancel it, press the button und eine kürzere Dauer auszuwählen, die Taste
«h» switches off.
repeatedly until the selected delayed start indicator light
SHORT TIME
To adjust the delay time and select a shorter period of time,
STARTVERZÖGERUNG drücken. Um abzubrechen,
repeatedly until the selected delayed start indicator light
«h» switches off.
The DELAY function cannot be set once a wash cycle
This option can be used to reduce the duration of the main
press the DELAY button. To cancel it, press the button die Taste wiederholt drücken, bis das ausgewählte
«h» switches off.
programs while maintaining the same washing and drying
has been started.
The DELAY function cannot be set once a wash cycle
Startverzögerung-Anzeigelicht „h" aus geht.
repeatedly until the selected delayed start indicator light
The DELAY function cannot be set once a wash cycle
performance levels.
Bei bereits in Gang gesetztem Programm ist eine
has been started.
After selecting the program, press the SHORT TIME button «h» switches off.
has been started.
and the indicator light will switch on. To deselect the option, Startzeitvorwahl nicht mehr möglich.
SHORT TIME
The DELAY function cannot be set once a wash cycle
press the same button again.
KURZZEIT
has been started.
SHORT TIME
This option can be used to reduce the duration of the main
Diese Option kann verwendet werden um die
EXTRA DRY
programs while maintaining the same washing and drying
This option can be used to reduce the duration of the main Dauer der Hauptprogramme zu reduzieren,
To improve the drying of the dishes, after selecting the
performance levels.
unter Beibehaltung derselben Spül- und
program, press the EXTRA DRY button and the indicator
programs while maintaining the same washing and drying
SHORT TIME
light comes on.
Trockenleistungsgrade. Nach der Auswahl des
After selecting the program, press the SHORT TIME button
performance levels.
This option can be used to reduce the duration of the main
A higher temperature during the final rinse and an extended
Programms, drücken Sie die KURZZEIT-Taste und das
Program
and the indicator light will switch on. To deselect the option,
After selecting the program, press the SHORT TIME button
drying phase allow for improving drying. To deselect the
programs while maintaining the same washing and drying
Anzeigelicht leuchtet auf. Durch erneuten Druck auf
option, press the same button again. The EXTRA DRY press the same button again.
and the indicator light will switch on. To deselect the option,
performance levels.
die Taste wird die Option deaktiviert.
option results in the lengthening of the wash cycle.
press the same button again.
After selecting the program, press the SHORT TIME button
EXTRA DRY
EXTRA DRY
Eco
1 and the indicator light will switch on. To deselect the option,
Um die Trocknung des Geschirrs zu verbessern, nach
EXTRA DRY
To improve the drying of the dishes, after selecting the
press the same button again.
der Programmauswahl die Taste EXTRA DRY drücken
program, press the EXTRA DRY button and the indicator
und das Anzeigelicht leuchtet auf. Eine höhere
To improve the drying of the dishes, after selecting the
Conventional
light comes on. Temperatur während des letzten Spülgangs und ein
2
program, press the EXTRA DRY button and the indicator
EXTRA DRY
wash and dry
längerer Trockengang verbessern die Trocknung
A higher temperature during the final rinse and an extended
light comes on.
To improve the drying of the dishes, after selecting the
des Geschirrs. Durch erneuten Druck auf die Taste
drying phase allow for improving drying. To deselect the
A higher temperature during the final rinse and an extended
program, press the EXTRA DRY button and the indicator
wird die Option deaktiviert. Die Option EXTRA DRY
Intensive
3
option, press the same button again. The EXTRA DRY
drying phase allow for improving drying. To deselect the
light comes on.
verlängert die Programmdauer.
option results in the lengthening of the wash cycle.
option, press the same button again. The EXTRA DRY
A higher temperature during the final rinse and an extended
TABLET (Tab)
TAB
option results in the lengthening of the wash cycle.
drying phase allow for improving drying. To deselect the
Fast
4 Diese Einstellung erlaubt, die Spülleistung des
This setting allows you to optimize the performance of
option, press the same button again. The EXTRA DRY
Programms je nach verwendetem Spülmitteltyp zu
the program according to the type of detergent used.
optimieren.
option results in the lengthening of the wash cycle.
Press the START/PAUSE button for 3 seconds (the
Sanitizing Drücken Sie die Taste START/PAUSE 3 Sekunden
5
corresponding symbol will light up) if you use combined
lang (das entsprechende Symbol leuchtet), wenn Sie
detergents in tablet form (rinse aid, salt and detergent in
kombinierte Spülmittel in Tablettenform verwenden
(Klarspüler, Salz und Spülmittel in einer Tablette).
1 dose).
Pre-Wash
6
Wenn Sie Pulver oder Flüssigspülmittel
If you use powder or liquid detergent, this option
verwenden, muss diese Option ausgeschaltet sein.
should be off.
Self-Clean
7
FLEXI WASH
If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and
detergent.
Select the program and then press the FLEXI WASH button:
the symbol of the chosen rack will appear on the display.
By default the appliance washes dishes in all racks.
To wash only the specific rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
Remember to load the upper or lower rack only, and to
reduce the amount of detergent accordingly.
If upper rack is removed, please apply detergent
directly to tub instead of detergent dispenser.
DELAY
The start time of the program may be delayed for a period
of time between 1 and 12 hours.
1. Press the DELAY button: the corresponding «h» symbol
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of
the selected wash cycle will be increased.
2. Select the wash program, press the START/PAUSE
button and within 4 seconds close the door: the timer
will begin counting down.
3. Once this time has elapsed, the indicator light «h»
switches off and the wash cycle begins.
To adjust the delay time and select a shorter period of time,
press the DELAY button. To cancel it, press the button
repeatedly until the selected delayed start indicator light
«h» switches off.
The DELAY function cannot be set once a wash cycle
has been started.
SHORT TIME
This option can be used to reduce the duration of the main
programs while maintaining the same washing and drying
performance levels.
After selecting the program, press the SHORT TIME button
and the indicator light will switch on. To deselect the option,
press the same button again.
EXTRA DRY
NaturalDry
To improve the drying of the dishes, after selecting the
NaturalDry is a convection drying system which automatically
program, press the EXTRA DRY button and the indicator
opens the door during/after drying phase to ensure exceptional
light comes on.
drying performance every day. Door opens at the temperature
A higher temperature during the final rinse and an extended
that is safe to your kitchen furniture, thus door will not be opened
drying phase allow for improving drying. To deselect the
when the option of SHORT TIME is on.
option, press the same button again. The EXTRA DRY
As additional steam protection, special designed protection foil is
option results in the lengthening of the wash cycle.
added together with the dishwasher. To see how to mount protec-
tion foil please refer to (INSTALLATION GUIDE).
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding
button (6 sec).
2. You are currently in Light Control Menu (please refer to
OPERATION INDICATOR description), if you don't want to
change anything please press and hold
the two letters appears on the display)
3. You switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing
E
To confirm the change and exit from the Control Menu please
press and hold
11
50°
55°
rapidly 3 times
65°
-
50°
65°
-
-
-
65°
TABLET (Tab)
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the START/PAUSE button for 3 seconds (the
corresponding symbol will light up) if you use combined
detergents in tablet form (rinse aid, salt and detergent in
1 dose).
ENGLISH If you use powder or liquid detergent, this option
should be off.
Make sure the cap is screwed on tightly, so that no detergent can
BETRIEBSANZEIGE
TABLET (Tab)
OPERATION INDICATOR get into the container during the wash program (this could damage
Eine auf den Boden projizierte LED zeigt an, dass
the water softener beyond repair).
A LED light projected on the floor indicates that the
Make sure the cap is screwed on tightly, so that no detergent can
This setting allows you to optimize the performance of
der Geschirrspüler in Betrieb ist. Eine der folgenden
dishwasher is working. One of the following operating As soon as this procedure is complete, run a program without
get into the container during the wash program (this could damage
the program according to the type of detergent used.
modes can be selected:
Betriebsarten kann ausgewählt werden:
loading. The "Pre-Wash" program alone is NOT
the water softener beyond repair).
a) Disabled function.
Press the START/PAUSE button for 3 seconds (the
a) Deaktivierte Funktion. Residual saline solution or grains of salt can lead to corrosion,
As soon as this procedure is complete, run a program without
b) When the cycle starts the light goes on for few seconds,
TABLET (Tab)
irreparably damaging the stainless steel components.
b) Wenn das Programm startet schaltet sich das corresponding symbol will light up) if you use combined
loading. The "Pre-Wash" program alone is NOT
stays off during the cycle and flashes at the end of the
This setting allows you to optimize the performance of The guarantee is not applicable if faults are caused by such
cycle.
Residual saline solution or grains of salt can lead to corrosion, Licht für einige Sekunden ein, bleibt während
detergents in tablet form (rinse aid, salt and detergent in
the program according to the type of detergent used.
c) The light stays on during the cycle and flashes at the circumstances.
irreparably damaging the stainless steel components.
dem Programm ausgeschaltet und blinkt zu
1 dose).
Press the START/PAUSE button for 3 seconds (the
end of the cycle (default mode).
The guarantee is not applicable if faults are caused by such
Programmende.
corresponding symbol will light up) if you use combined If the delayed start was set, the light goes on either for the
If you use powder or liquid detergent, this option
circumstances.
c) Das Licht bleibt während dem Programm an und
detergents in tablet form (rinse aid, salt and detergent in first few seconds or the entire duration of the countdown,
heating element may be damaged as a result. should be off.
based on whether mode b) or c) was set.
1 dose).
blinkt zu Programmende (Standardbetriebsweise).
Whenever you need to add salt, it is mandatory to complete
The light goes off every time the door is opened. To select
If you use powder or liquid detergent, this option
Wenn der verzögerte Start ausgewählt wurde,
the mode you prefer, switch on the machine, hold down the procedure before the beginning of the washing cycle.
heating element may be damaged as a result.
should be off.
schaltet sich das Licht entweder die ersten paar
button P until one of the three letters appears on the display,
Whenever you need to add salt, it is mandatory to complete
OPERATION INDICATOR
press button P until you reach the desired letter (or mode),
Sekunden an oder bleibt während der gesamten
SETTING THE WATER HARDNESS
the procedure before the beginning of the washing cycle.
OPERATION INDICATOR hold down button P to confirm the selection.
ENGLISH
A LED light projected on the floor indicates that the
Dauer der Rückzählung an, je nachdem ob b) oder c)
To allow the water softener to work in a perfect way, it is essential
Note: If NaturalDry is active and it opens the door, then
A LED light projected on the floor indicates that the
ENGLISH
eingestellt wurde. Das Licht geht aus, sobald die Tür that the water hardness setting is based on the actual water hard-
SETTING THE WATER HARDNESS dishwasher is working. One of the following operating
Operation Indicator will not flash at the end of cycle.
dishwasher is working. One of the following operating
ness in your house. This information can be obtained from your local
geöffnet wird.
To allow the water softener to work in a perfect way, it is essential
modes can be selected:
modes can be selected:
water supplier. The factory setting is for average (3) water hardness.
that the water hardness setting is based on the actual water hard- Um die bevorzugte Betriebsart auszuwählen, die
a) Disabled function.
a) Disabled function.
Make sure the cap is screwed on tightly, so that no detergent can
ness in your house. This information can be obtained from your local
b) When the cycle starts the light goes on for few seconds, NaturalDry Maschine einschalten, die Taste
• Switch on the appliance by pressing the ON/OFF button.
b) When the cycle starts the light goes on for few seconds,
get into the container during the wash program (this could damage
Make sure the cap is screwed on tightly, so that no detergent can
stays off during the cycle and flashes at the end of the water supplier. The factory setting is for average (3) water hardness.
NaturalDry is a convection drying system which automatically bis einer der drei Buchstaben auf dem Display
• Switch off the appliance by pressing the ON/OFF button.
the water softener beyond repair).
get into the container during the wash program (this could damage
cycle.
opens the door during/after drying phase to ensure exceptional
erscheint, die Taste
• Hold down button
• Switch on the appliance by pressing the ON/OFF button.
c) The light stays on during the cycle and flashes at the As soon as this procedure is complete, run a program without drying performance every day. Door opens at the temperature
the water softener beyond repair).
Buchstabe (oder Betriebsweise) erreicht ist, die Taste
• Switch on the appliance by pressing the ON/OFF button.
• Switch off the appliance by pressing the ON/OFF button. that is safe to your kitchen furniture, thus door will not be opened
end of the cycle (default mode).
loading. The "Pre-Wash" program alone is NOT
As soon as this procedure is complete, run a program without
c) The light stays on during the cycle and flashes at the
when the option of SHORT TIME is on. •
If the delayed start was set, the light goes on either for the • Hold down button
Residual saline solution or grains of salt can lead to corrosion,
loading. The "Pre-Wash" program alone is NOT
As additional steam protection, special designed protection foil is
first few seconds or the entire duration of the countdown,
Hinweis: Wenn NaturalDry aktiv ist und die Tür öffnet,
• Switch on the appliance by pressing the ON/OFF button.
irreparably damaging the stainless steel components.
Residual saline solution or grains of salt can lead to corrosion,
added together with the dishwasher. To see how to mount protec-
based on whether mode b) or c) was set.
•
• The current selection level number and the salt indicator light blinkt die Betriebsanzeige bei Ende des Spülgangs
If the delayed start was set, the light goes on either for the
The guarantee is not applicable if faults are caused by such
irreparably damaging the stainless steel components. tion foil please refer to (INSTALLATION GUIDE).
The light goes off every time the door is opened. To select
NaturalDry functionality could be disabled by the user as follows: nicht.
circumstances.
The guarantee is not applicable if faults are caused by such
first few seconds or the entire duration of the countdown,
the mode you prefer, switch on the machine, hold down
1. Go to the Dishwasher software menu pressing and holding
• Press button to select the desired hardness level (see
circumstances.
button P until one of the three letters appears on the display,
NATURALDRY
based on whether mode b) or c) was set.
button (6 sec).
WATER HARDNESS TABLE).
NaturalDry
press button P until you reach the desired letter (or mode),
2. You are currently in Light Control Menu (please refer to
Das Türöffnungssystem NaturalDry ist ein
The light goes off every time the door is opened. To select
hold down button P to confirm the selection. heating element may be damaged as a result.
OPERATION INDICATOR description), if you don't want to
Water Hardness Table
Heißlufttrocknungssystem, das die Tür während/nach der
Door opening system NaturalDry is a convection drying system
the mode you prefer, switch on the machine, hold down
Note: If NaturalDry is active and it opens the door, then
Whenever you need to add salt, it is mandatory to complete
change anything please press and hold
heating element may be damaged as a result.
Trockenphase automatisch öffnet, um täglich hervorragende
1
Operation Indicator will not flash at the end of cycle.
the two letters appears on the display) which automatically opens the door during/after drying phase to
the procedure before the beginning of the washing cycle.
Whenever you need to add salt, it is mandatory to complete button P until one of the three letters appears on the display,
Level
3. You switched to NaturalDry Control Menu, you could change
Trockenleistung sicherzustellen. Die Tür öffnet sich bei einer
ensure exceptional drying performance every day. Door opens at
the procedure before the beginning of the washing cycle. 2
press button P until you reach the desired letter (or mode),
status of NaturalDry functionality by pressing
SETTING THE WATER HARDNESS Temperatur, die für Ihre Küchenmöbel ungefährlich ist. Als
1 Soft
E the temperature that is safe to your kitchen furniture.
– enabled
3
hold down button P to confirm the selection.
SETTING THE WATER HARDNESS zusätzlicher Dampfschutz wird dem Geschirrspüler eine
To allow the water softener to work in a perfect way, it is essential
To confirm the change and exit from the Control Menu please
2 Medium
As additional steam protection, special designed protection foil is
Note: If NaturalDry is active and it opens the door, then
4
that the water hardness setting is based on the actual water hard- press and hold
speziell entwickelte Schutzfolie beigefügt. Für die Montage der
To allow the water softener to work in a perfect way, it is essential
3 Average added together with the dishwasher. To see how to mount protec-
ness in your house. This information can be obtained from your local Operation Indicator will not flash at the end of cycle.
that the water hardness setting is based on the actual water hard- NaturalDry
Schutzfolie siehe (MONTAGEANLEITUNG).
5
tion foil please refer to (INSTALLATION GUIDE).
4 water supplier. The factory setting is for average (3) water hardness. Hard
ness in your house. This information can be obtained from your local
Die NaturalDry-Funktion könnte wie folgt durch den Benutzer
NaturalDry
NaturalDry is a convection drying system which automatically
NaturalDry functionality could be disabled by the user as follows:
water supplier. The factory setting is for average (3) water hardness. • Switch off the appliance by pressing the ON/OFF button.
deaktiviert werden:
5 Very hard
• Switch on the appliance by pressing the ON/OFF button.
opens the door during/after drying phase to ensure exceptional
NaturalDry is a convection drying system which automatically
Setting is complete!
1. Go to the Dishwasher software menu pressing and holding
1. Gehen Sie zum Betriebsanzeige-Menü wie im letzten Schritt
• Switch off the appliance by pressing the ON/OFF button.
• Switch on the appliance by pressing the ON/OFF button.
drying performance every day. Door opens at the temperature
opens the door during/after drying phase to ensure exceptional
• Switch off the appliance by pressing the ON/OFF button.
NaturalDry
button (6 sec).
und halten Sie
• Hold down button
• Switch off the appliance by pressing the ON/OFF button.
that is safe to your kitchen furniture, thus door will not be opened
FILLING THE RINSE AID DISPENSER
Setting is complete!
drying performance every day. Door opens at the temperature
• Switch on the appliance by pressing the ON/OFF button. 11 2. Halten Sie 2. You switched to NaturalDry Control Menu, you could change
• Hold down button
NaturalDry is a convection drying system which automatically
when the option of SHORT TIME is on.
• The current selection level number and the salt indicator light that is safe to your kitchen furniture, thus door will not be opened
• Switch on the appliance by pressing the ON/OFF button. NaturalDry-Menü zu gelangen. Rinse aid makes dish DRYING easier. The rinse aid dispenser A
status of NaturalDry functionality by pressing
opens the door during/after drying phase to ensure exceptional
FILLING THE RINSE AID DISPENSER
As additional steam protection, special designed protection foil is
should be filled when the RINSE AID REFILL indicator light
• The current selection level number and the salt indicator light
3. Sie haben auf das Menü NaturalDry-Steuerung umgeschaltet.
when the option of SHORT TIME is on. E
– enabled
drying performance every day. Door opens at the temperature
• Press button
in the control panel is lit.
added together with the dishwasher. To see how to mount protec-
Rinse aid makes dish DRYING easier. The rinse aid dispenser A Sie können nun durch Drücken der Taste
As additional steam protection, special designed protection foil is
To confirm the change and exit from the Control Menu please
that is safe to your kitchen furniture, thus door will not be opened
WATER HARDNESS TABLE).
• Press button to select the desired hardness level (see
should be filled when the RINSE AID REFILL indicator light
NaturalDry-Funktion ändern:
tion foil please refer to (INSTALLATION GUIDE).
added together with the dishwasher. To see how to mount protec-
press and hold
WATER HARDNESS TABLE). when the option of SHORT TIME is on.
in the control panel is lit.
E – aktiviert d – deaktiviert
NaturalDry functionality could be disabled by the user as follows:
tion foil please refer to (INSTALLATION GUIDE).
As additional steam protection, special designed protection foil is
Zum Bestätigen der Änderung und zum Verlassen des
Water Hardness Table
1. Go to the Dishwasher software menu pressing and holding
NaturalDry functionality could be disabled by the user as follows:
Level
added together with the dishwasher. To see how to mount protec-
Steuerungsmenüs drücken und halten Sie bitte die
button (6 sec).
d 1. Go to the Dishwasher software menu pressing and holding
– enabled – disabled
Level
(3 Sek.). tion foil please refer to (INSTALLATION GUIDE).
1 Soft
2. You are currently in Light Control Menu (please refer to
button (6 sec).
NaturalDry functionality could be disabled by the user as follows:
button (3 sec).
1 Soft
OPERATION INDICATOR description), if you don't want to
2 Medium
2. You are currently in Light Control Menu (please refer to
1. Go to the Dishwasher software menu pressing and holding
2 Medium change anything please press and hold
OPERATION INDICATOR description), if you don't want to
3 Average
Available
button (6 sec).
the two letters appears on the display)
3 Average
change anything please press and hold
4 1. Open the dispenser B by pressing and pulling up the tab on Hard
options
2. You are currently in Light Control Menu (please refer to *)
3. You switched to NaturalDry Control Menu, you could change
the two letters appears on the display)
4 Hard B
5 Very hard
OPERATION INDICATOR description), if you don't want to AUTO 50° - 60°
status of NaturalDry functionality by pressing
2. Carefully introduce the rinse aid as far as the maximum
1. Open the dispenser B by pressing and pulling up the tab on 3. You switched to NaturalDry Control Menu, you could change
5 Very hard
change anything please press and hold
E
– enabled
the lid.
• Switch off the appliance by pressing the ON/OFF button.
status of NaturalDry functionality by pressing
Intensiv 65°
the two letters appears on the display)
2. Carefully introduce the rinse aid as far as the maximum
Setting is complete! To confirm the change and exit from the Control Menu please
• Switch off the appliance by pressing the ON/OFF button.
E
– enabled
3. You switched to NaturalDry Control Menu, you could change
3. Press the lid down until you hear a click to close it.
(110 ml) reference notch of the filling space - avoid spilling it.
Schnelles Spülen 30' 50°
Setting is complete!
press and hold
To confirm the change and exit from the Control Menu please
NEVER pour the rinse aid directly into the tub.
If this happens, clean the spill immediately with a dry cloth. status of NaturalDry functionality by pressing
FILLING THE RINSE AID DISPENSER
press and hold
Schnelles Spülen und Trocknen
3. Press the lid down until you hear a click to close it.
E
– enabled
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
NEVER pour the rinse aid directly into the tub.
To confirm the change and exit from the Control Menu please
should be filled when the RINSE AID REFILL indicator light
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
press and hold
in the control panel is lit.
should be filled when the RINSE AID REFILL indicator light
-
in the control panel is lit.
Leise 50° (Nachtprogramm)
Hygiene 65°
-
11
11
-
Selbstreinigung 65°
* abhängig von den Einstellungen
11
1. Open the dispenser B by pressing and pulling up the tab on
B
- the lid.
1. Open the dispenser B by pressing and pulling up the tab on
2. Carefully introduce the rinse aid as far as the maximum
the lid.
(110 ml) reference notch of the filling space - avoid spilling it.
2. Carefully introduce the rinse aid as far as the maximum
If this happens, clean the spill immediately with a dry cloth.
(110 ml) reference notch of the filling space - avoid spilling it.
-
3. Press the lid down until you hear a click to close it.
If this happens, clean the spill immediately with a dry cloth.
NEVER pour the rinse aid directly into the tub.
3. Press the lid down until you hear a click to close it.
NEVER pour the rinse aid directly into the tub.
ENGLISH
ENGLISH
EN
TABLET (Tab)
Make sure the cap is screwed on tightly, so that no detergen
TABLET (Tab)
This setting allows you to optimize the performance of
get into the container during the wash program (this could da
the program according to the type of detergent used.
This setting allows you to optimize the performance of
the water softener beyond repair).
Press the START/PAUSE button for 3 seconds (the
the program according to the type of detergent used. As soon as this procedure is complete, run a program witho
corresponding symbol will light up) if you use combined loading. The "Pre-Wash" program alone is NOT
Press the START/PAUSE button for 3 seconds (the
Residual saline solution or grains of salt can lead to corrosio
detergents in tablet form (rinse aid, salt and detergent in
corresponding symbol will light up) if you use combined
irreparably damaging the stainless steel components.
1 dose).
detergents in tablet form (rinse aid, salt and detergent in
The guarantee is not applicable if faults are caused by such
If you use powder or liquid detergent, this option
1 dose).
circumstances.
should be off.
If you use powder or liquid detergent, this option
should be off.
heating element may be damaged as a result.
Whenever you need to add salt, it is mandatory to comp
OPERATION INDICATOR
the procedure before the beginning of the washing cycl
OPERATION INDICATOR
A LED light projected on the floor indicates that the
SETTING THE WATER HARDNESS
dishwasher is working. One of the following operating
A LED light projected on the floor indicates that the
To allow the water softener to work in a perfect way, it is essen
modes can be selected:
dishwasher is working. One of the following operating
that the water hardness setting is based on the actual water ha
a) Disabled function.
modes can be selected:
ness in your house. This information can be obtained from you
b) When the cycle starts the light goes on for few seconds,
a) Disabled function.
water supplier. The factory setting is for average (3) water hard
stays off during the cycle and flashes at the end of the
b) When the cycle starts the light goes on for few seconds,
• Switch on the appliance by pressing the ON/OFF button.
cycle.
stays off during the cycle and flashes at the end of the
• Switch off the appliance by pressing the ON/OFF button.
ENGLISH
c) The light stays on during the cycle and flashes at the
cycle.
• Hold down button
end of the cycle (default mode).
• Switch on the appliance by pressing the ON/OFF button.
c) The light stays on during the cycle and flashes at the
stays off during the cycle and flashes at the end of the
• The current selection level number and the salt indicator drücken, bis der gewünschte
If the delayed start was set, the light goes on either for the for 5 seconds, until you hear a beep.
end of the cycle (default mode).
cycle.
first few seconds or the entire duration of the countdown,
If the delayed start was set, the light goes on either for the
Make sure the cap is screwed on tightly, so that no deterg
• Press button ENGLISH
gedrückt halten, um die Auswahl zu bestätigen. The current selection level number and the salt indicator light
for 5 seconds, until you hear a beep.
based on whether mode b) or c) was set.
first few seconds or the entire duration of the countdown,
get into the container during the wash program (this could d
WATER HARDNESS TABLE).
end of the cycle (default mode).
The light goes off every time the door is opened. To select the water softener beyond repair).
based on whether mode b) or c) was set.
Press button to select the desired hardness level (see
As soon as this procedure is complete, run a program with
the mode you prefer, switch on the machine, hold down
WATER HARDNESS TABLE).
The light goes off every time the door is opened. To select
loading. The "Pre-Wash" program alone is NOT
Make sure the cap is screwed on tightly, so tha
button P until one of the three letters appears on the display, Level
the mode you prefer, switch on the machine, hold down
Water Hardness Table
Residual saline solution or grains of salt can lead to corros
get into the container during the wash program
press button P until you reach the desired letter (or mode),
button P until one of the three letters appears on the display,
irreparably damaging the stainless steel components.
1 Soft
the water softener beyond repair).
Level
hold down button P to confirm the selection.
The guarantee is not applicable if faults are caused by suc
press button P until you reach the desired letter (or mode),
German degrees
As soon as this procedure is complete, run a p
2 Medium
button (until one of
circumstances.
Note: If NaturalDry is active and it opens the door, then
hold down button P to confirm the selection.
°dH °fH
Soft loading. The "Pre-Wash" program alone is NO
3 Average
Operation Indicator will not flash at the end of cycle. German degrees French degrees Residual saline solution or grains of salt can le
Note: If NaturalDry is active and it opens the door, then
Medium
button:
4 Hard
irreparably damaging the stainless steel comp
0 - 6 0 - 10
Operation Indicator will not flash at the end of cycle.
d
– disabled
heating element may be damaged as a result.
Average
The guarantee is not applicable if faults are ca
5 Very hard
7 - 11 11 - 20
Whenever you need to add salt, it is mandatory to com
circumstances.
Hard
button (3 sec).
the procedure before the beginning of the washing cy
12 - 17 21 - 30
• Switch off the appliance by pressing the ON/OFF button.
Very hard
Setting is complete!
18 - 34 31 - 60
SETTING THE WATER HARDNESS
heating element may be damaged as a resu
35 - 50 To allow the water softener to work in a perfect way, it is esse 61 - 90
Whenever you need to add salt, it is manda
FILLING THE RINSE AID DISPENSER
that the water hardness setting is based on the actual water h
the procedure before the beginning of the w
ness in your house. This information can be obtained from yo
gedrückt, bis das Menü erscheint. Rinse aid makes dish DRYING easier. The rinse aid dispens
for 5 seconds, until you hear a beep.
water supplier. The factory setting is for average (3) water ha
should be filled when the RINSE AID REFILL indicator ligh
erneut 6 Sekunden lang gedrückt, um zum SETTING THE WATER HARDNESS
for 5 seconds, until you hear a beep.
in the control panel is lit.
To allow the water softener to work in a perfect w
• Switch on the appliance by pressing the ON/OFF button
that the water hardness setting is based on the a
d
• Switch off the appliance by pressing the ON/OFF button
– disabled
to select the desired hardness level (see
ness in your house. This information can be obta
• Hold down button
water supplier. The factory setting is for average
• Switch on the appliance by pressing the ON/OFF button
button (until one of button (3 sec).
• The current selection level number and the salt indicato
Water Hardness Table
• Switch on the appliance by pressing the ON
• Switch off the appliance by pressing the ON
°dH
• Press button
button:
• Hold down button
German degrees °dH
WATER HARDNESS TABLE).
• Switch on the appliance by pressing the ON
German degrees French degrees
0 - 6
• The current selection level number and the
0 - 6
7 - 11
Duration of
1. Open the dispenser B by pressing and pulling up the tab o
7 - 11
Level
• Press button
12 - 17
wash pro-
the lid.
B
consumption
WATER HARDNESS TABLE).
Eco 50°
12 - 17
2. Carefully introduce the rinse aid as far as the maximum
18 - 34
gram
1 A Soft
(litres/cycle)
(110 ml) reference notch of the filling space - avoid spilling
the lid.
18 - 34
35 - 50
(h:min)
2 **) Medium
If this happens, clean the spill immediately with a dry cloth
35 - 50
3. Press the lid down until you hear a click to close it.
(110 ml) reference notch of the filling space - avoid spilling it. d 3 Average
– disabled
NEVER pour the rinse aid directly into the tub.
2:45
If this happens, clean the spill immediately with a dry cloth.
4 Hard
d
– disabled
1
button (3 sec).
5 Very hard
2
button (3 sec).
d
2:00 3
– disabled
• Switch off the appliance by pressing the ON/OFF button
50°
Setting is complete!
4
button (3 sec).
5
Glas 45°
2:30 FILLING THE RINSE AID DISPENSER
• Switch off the appliance by pressing the ON/
Rinse aid makes dish DRYING easier. The rinse aid dispe
Setting is complete!
should be filled when the RINSE AID REFILL indicator li
0:55
in the control panel is lit.
FILLING THE RINSE AID DISPENSER
Vorspülen
Rinse aid makes dish DRYING easier. The rins
1:40 should be filled when the RINSE AID REFILL
in the control panel is lit.
B
A
0:10
1. Open the dispenser B by pressing and pulling up the tab
0:50
the lid.
2. Carefully introduce the rinse aid as far as the maximum
EN
25
ADJUSTING THE DOSA
If you are not completely sat
adjust the quantity of rinse a
• Switch the dishwasher on
• Switch it off using the ON
• Press button
• Switch it on using the ON
• The current selection level n
• Press button
s. supplied.
• Switch it off using the ON
Setting is complete!
If the rinse aid level is set to
supplied. The LOW RINSE A
run out of rinse aid. A maxim
the dishwasher model. The fa
please follow instruction abov
• If you see bluish streaks o 9
ADJUSTING THE
gedrückt halten,
for 5 seconds, until you hear a beep
• If there are drops of wate
ADJUSTING THE DO
If you are not compl
set a high number (3-4).
adjust the quantity o
If you are not completely
• Switch the dishw
adjust the quantity of rins
• Switch it off using
• Switch the dishwashe
FILLING THE DETERGE
to select the desired hardness level (see
• Press button
• Switch it off using the
• Switch it on using
• Press button
dishwashers.
Water Hardness Table • The current selecti
• Switch it on using the
To achieve the best washing
• Press button
• The current selection lev
°dH
useof detergent, rinse aid liq
s. supplied.
• Press button
German degrees French degre
We recommend using deterg
• Switch it off using
s. supplied.
°dH °fH
or chlorine, as these produc 0 - 6
Setting is complete!
• Switch it off using the
French degrees
Good washing results also d
7 - 11
Setting is complete!
If the rinse aid level
detergent being used.
0 - 6 0 - 10
12 - 17 supplied. The LOW
If the rinse aid level is se
Exceeding the stated amoun
7 - 11 11 - 20
run out of rinse aid. A
supplied. The LOW RINS
18 - 34
wash and increases environ
the dishwasher mod
run out of rinse aid. A ma
12 - 17 21 - 30
The amount can be adjusted
35 - 50
please follow instruc
the dishwasher model. Th
18 - 34 normally soiled items, use a 31 - 60
• If you see bluish s
please follow instruction a
detergent) or 35ml (liquid de
35 - 50 61 - 90
• If there are drops
• If you see bluish streak
detergent directly inside the
set a high numbe
• If there are drops of w
will be enough.
set a high number (3-4
If the crockery is only lightly
water before being placed in
FILLING THE DE
of detergent used according
FILLING THE DETER
powder/gel putted inside the
dishwashers.
button:
To achieve the best
dishwashers.
useof detergent, rins
To achieve the best wash
den Status der
for 5 seconds, until you hear a bee
We recommend usin
useof detergent, rinse aid
or chlorine, as these
We recommend using de
Good washing resul
or chlorine, as these prod
B
detergent being use
°fH Good washing results als
to select the desired hardness level (se
A
Taste
for 5 seconds, until you
detergent being used.
French degrees °fH
Exceeding the state
wash and increases
0 - 10
Exceeding the stated am
B Water Hardness Table
The amount can be
wash and increases envi
0 - 10
11 - 20
TÜR ÖFFNEN
normally soiled item
The amount can be adju
°dH
Water A Energy
11 - 20 button (until one of
to select the desired hardne
21 - 30
detergent) or 35ml (
normally soiled items, us
German degrees
consumption
nach 165 min
21 - 30
button (until one of
detergent directly in
detergent) or 35ml (liquid
31 - 60 1. When measuring out the
0 - 6
(kWh/cycle)
will be enough.
detergent directly inside
lier information to add the
31 - 60 Water Hardness Table
61 - 90
80-170 min*
7 - 11
If the crockery is onl
will be enough. button:
B there are indications to
61 - 90 °dH
button (until one of
Level water before being p
If the crockery is only ligh
2. Remove detergent residu 12 - 17
button:
Programmende
German degrees
of detergent used ac
12.0 0.92
water before being place
and close the cover until
18 - 34
Soft 0 - 6
powder/gel putted in
of detergent used accord
3. Close the lid of the deterg
N/A
35 - 50
powder/gel putted inside
Medium the closing device is secu 7 - 11
button:
Programmende
15.0 Average 1.35 12 - 17
The detergent dispenser au
according to the program. If
Hard 18 - 34
recommend using the TABL
Very hard 35 - 50
Programmende
B
program so that the best wa
15.0 1.50
B
achieved.
Programmende A
A
N/A
11.5 1.10
N/A
11.5 1.30
N/A
1. When measuring
A
lier information to
1. When measuring out
B there are indic
lier information to add
2. Remove deterge
B there are indication
4.5 0.01
and close the co
2. Remove detergent re
3. Close the lid of th
and close the cover u
B
the closing devic
3. Close the lid of the de
8.0 0.80
the closing device is s
The detergent dispe
according to the pro
The detergent dispenser
ADJU
If you
adjust
• Sw
• Sw
• Pre
• Sw
• The
three time
• Pre
s. sup
• Sw
to select t
Settin
If the r
suppli
run ou
the dis
please
• If y
• If th
set
FILLI
dishw
th
To ach
three
useof
We re
to
°fH
or chlo
to sele
Good
deterg
0 - 10
Excee
11 - 20
wash
21 - 30
The a
31 - 60 norma
deterg
61 - 90
deterg
will be
If the
water
of det
powde
B
A
A
1. Wh
°fH
lier
French deg
B t
0 - 10
2. Re
11 - 2
an
3. Clo
21 - 3
the
31 - 6
The d
61 - 9
accor
recom
progr
achie
A