Table of Contents
Advertisement
POWER CORD DAISY CHAIN
This feature allows the fixtures to be connected to one another using the IEC input and output sock-
ets.
The maximum number of units that can be connected in this way is 25 fixtures. A new power
outlet is required to accommodate any additional fixtures.
All linked fixtures must be of the same make and model type. DO NOT mix fixtures.
FUSE REPLACEMENT
Disconnect the unit from its power source, then remove the power cord from the unit. Locate the fuse
holder inside the power socket. Carefully insert a flat-head screw driver into the power socket and
gently pry out the fuse holder. Remove the bad fuse and replace with a new one of the same rating.
Please note that the fuse holder also includes a holder for a spare fuse.
TROUBLE SHOOTING
Listed below are common problems that you may encounter, along with potential solutions.
Unit does not respond to DMX:
Check that the DMX cables are connected and wired correctly (pin 3 is "hot"; it is common on some
other DMX devices that pin 2 may be "hot"). Verify that all cable are connected to the correct connec-
tors, as the way in which the input and outputs are connected can affect operation.
Unit does not respond to sound:
•
Quiet or high pitched sounds may not activate the unit.
•
Verify that Sound Active mode is activated.
CLEANING
Due to fog residue, smoke, and dust, cleaning of the internal and external optical lenses and mir-
ror should be carried out periodically. Cleaning frequency depends on the environment in which the
fixture operates. In heavy club use, cleaning on a monthly basis is recommended in order to ensure
longevity and crisp output.
•
Use normal glass cleaner and a soft cloth to wipe down the outside casing.
•
Clean the external optics with glass cleaner and a soft cloth every 20 days.
•
Always be sure to dry all parts completely before plugging the unit back in.
24
Advertisement
Table of Contents
