Dimmer Curve Chart; Power Cord Daisy Chain; Cad Drawing; Troubleshooting - ADJ SABER SPOT RGBW User Instructions

Saber Spot RGBW
DIMMER
100%
50%
10%
0%
0 Sec Rise Time
0 sec Fade Time
Dimming Curve
Ramp Effect
0
Rise Time (ms)
Standard (default) 0
Stage 780
TV 1180
Architectural 1380
Theatre 1580
Saber Spot RGBW
170mm [6.7in]
160mm [6.3in]
28mm [1.1in]
76mm [3.0in]
ADJ Products, LLC - www.adj.com - Saber Spot RGBW Instruction Manual Page 32

Dimmer Curve Chart

Time (ms)
Down Time
1 sec Fade Time
255
0
Down Time (ms) Rise Time (ms) Down Time (ms)
0 0 0
1100 1540 1660
1520 1860 1940
1730 2040 2120
1940 2230 2280

CAD Drawing

135mm [5.3in]
108mm [4.3in]
230mm [ 9.1in ]
Saber Spot RGBW
With this feature you can connect the fixtures to one another
using the PowerCON input and output sockets. The quantity that
can be connected is 38 fixtures maximum @ 110V and a maxi-
mum 68 fixture's @ 240V. After maximum limit has been reached
you will need to use a new power outlet.
NOTE: USE CAUTION WHEN POWER LINKING OTHER
FIXTURES TO THE Saber Spot RGBW. POWER CONSUMPTION
OF OTHER LIGHTING FIXTURES WILL VARY. ALWAYS CHECK
THE MAX AMP OUT RATING OF EACH FIXTURE!
Saber Spot RGBW
255
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses and mirror should be carried out periodically to
optimize light output. Cleaning frequency depends on the environ-
ment in which the fixture operates (I.e. smoke, fog residue, dust,
dew). In heavy club use we recommend cleaning on a monthly basis.
Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every
20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Saber Spot RGBW
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output in RGBW Dimmer Mode;
1. Be sure the strobe setting is set to value 255.
ADJ Products, LLC - www.adj.com - Saber Spot RGBW Instruction Manual Page 33

Power Cord Daisy Chain

Cleaning
Trouble Shooting