ADJ MEGA GO PAR64 PLUS User Manual page 16

UC IR REMOTE CONTROL
The UC-IR infrared remote gives you control of various functions. To control the fixture you must aim
the remote at the front of the fixture, and the fixture's infrared sensor must be switched on, as de-
scribed in the Operation Instructions section of this manual. Maximum range is 30 feet. Please note
that the fixture only responds to the remote when the fixture is set to primary mode.
The Airstream IR (sold separately) remote transmitter plugs into the headphone jack of your iOS
phone or tablet. To control your IR fixture you must raise the volume to the maximum on your iOS
phone or tablet and aim the transmitter at the fixture sensor. Maximum range is 15 feet. After you
have purchased the Airstream IR transmitters, the app is a free download from the app store for your
iOS phone or tablet. The app comes with 3 pages of control depending on the fixture you are using.
This fixture works with app page 1.
STAND BY - Pressing this button will blackout the fixture. Press this button again to return to original
state.
FULL ON - Press and hold to fully illuminate the unit. The unit will return to its previous state when
the button is released.
FADE/GOBO - Activates color fade mode.
"DIMMER +" and "DIMMER -" - Adjust the color output intensity in static color mode.
STROBE - Press and hold to activate the strobe effect.
COLOR - Press this button to activate color control. Use buttons 1-9 to select your desired color.
1-9 - These buttons will allow you to select either a particular show option or color option, depending
on which operating mode the fixture is in.
SOUND ON & OFF - These buttons activate and deactivate the sound active mode.
SHOW 0 - This activates the show mode. Use buttons 1-9 to select your desired show. Press the
Show 0 button twice to run show 10, and button 1 twice to run show 11.
16