Table of Contents
Advertisement
POWER CORD DAISY CHAIN
With this feature you can connect the fixtures to one another using the IEC input and output sockets.
The quantity that can be connected is 16 fixtures maximum @ 120V and 27 fixtures maximum @ 230V.
After the maximum fixture's is reached you will need to use a new power outlet. They must be the
same fixtures.
DO NOT mix fixtures.
TROUBLE SHOOTING
No light output from the unit;
1. Be sure the fuse has not popped. The fuse is located on the rear panel.
2. Be sure the 4 flags are open and not closed.
FUSE REPLACEMENT
First unplug the power. The fuse holder is located next to the I.E.C power cord output. Using a phillips-head
screw driver unscrew the fuse holder. Remove the bad fuse and replace with a new one.
CLEANING
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses should be carried out
periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy club use we recommend cleaning on a monthly basis.
Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.
4. Always be sure to dry all parts completely before plugging the unit back in.
A.D.J. Supply Europe B.V. – www.americandj.eu – Ikon Profile WW Instruction Manual
Page 11
Advertisement
Table of Contents
