ADJ MEGA GO PAR64 PLUS User Manual page 15

ADJ LED RC2 CONTROL
DMX Control:
Operating through an DMX controller gives the user the freedom to create custom programs tailored
to his or her own individual needs. Follow the directions below to set your DMX channel mode and
ad-dress.
1. Before connecting to an DMX controller, please select your desired DMX channel mode by press-
ing the DMX Mode button, then using the "+" or "-" buttons to scroll through the available options.
Set the mode before you address the fixture.
2. Set the DMX address for the fixture by pressing the "S" button. The LEDs will flash 2-3 times, then
all the red LEDs will light. Use the number buttons to press in your desired address. Please note:
When setting the DMX address, an LED color will glow each time a number is pressed, then all
LEDs will flash 2-3 times when you have successfully set the DMX address.
3. Now you may connect the fixture via the XLR connections to any standard DMX controller.
• If All LEDs flash, the fixture is in DMX Mode 1: 4 DMX Channel.
• If the Red LEDs flash, the fixture is in DMX Mode 2: 5 DMX Channels.
• If the Green LEDs flash, the fixture is in DMX Mode 3: 6 DMX Channels.
• If the Blue LEDs flash, the fixture is in DMX Mode 4: 9 DMX Channels.
• If the UV LED flashes, the fixture is in DMX Mode 5: 10 DMX Channels.
15