Table of Contents
Advertisement
OPERATING INSTRUCTIONS
Sound Active Mode:
In this mode, the unit will react to sound and chase through the different colors.
1. Plug the fixture in and press the MODE button until "SoXX" is displayed. "XX" represents the cur-
rent sound active mode (1-16).
2. Use the UP or DOWN buttons to find your desired sound active mode.
3. Press the SET UP button to enter sound sensitivity adjustment. "SJ-X" will be displayed. Use the
UP or DOWN buttons to adjust the sensitivity. "SJ-1" is the lowest sensitivity, "SJ-8" is the highest.
Auto Run Mode:
There are 3 types of Auto Run Modes to choose from: Color Fade, Color Change, and both modes
running together. The running speed is adjustable in all 3 modes.
1. Plug the fixture in and press the MODE button until either "AFXX", "AJXX", or "A-JF" is displayed.
• AFXX = Color Fade mode. There are 16 Color Fade modes to choose from. Use the UP or
DOWNbuttons to scroll through the different Auto Fade modes.
• AJXX = Color Change mode. There are 16 Color Change modes to choose from. Use the UP or
DOWN buttons to scroll through the different Auto Change modes.
• A-JF = Both Color Fade and Color Change modes running.
2. After you have chosen your desired running mode, press the SET UP button until "SP.XX" is
displayed. You can now adjust the running speed of your desired program. Use the UP or DOWN
button to adjust the speed between "SP.01" (slowest) and "SP.16" (fastest). Press the SET UP but-
ton to return to your desired Auto Run Mode.
Static Color Mode:
1. Plug the fixture in and press the MODE button until "CLXX" is displayed.
2. There are 64 colors to choose from. Select your desired color by pressing the UP and DOWN but-
tons.
3. After you have selected your desired color, you can activate strobing by pressing the SET UP but-
ton to enter the Flash (strobe) mode. "FS.XX" will be displayed, indicating that the unit is in Flash
mode. The Flash can be adjusted between "FS.00" (flash off) to "FS.15" (fastest flash).
DMX Mode:
Operating through a DMX controller gives the user the freedom to create custom programs tailored
to his or her own individual needs. This function also allows you to use your fixtures as spot lights.
The Mega GO Par64 PLUS has 5 DMX modes: 4 channel mode, 5 channel mode, 6 channel mode, 9
channel mode, and a 10 channel mode. See the DMX Traits section of this manual for detailed infor-
mation.
1. To run your fixture in DMX mode, press the MODE button until "d.XXX" is displayed. "XXX" repre-
sents the currently selected DMX address. Use the UP or DOWN buttons to select your desired
DMX address, then press the SETUP button to select your DMX Channel mode.
2. Use the UP or DOWN buttons to scroll through the DMX Channel modes. The available channel
modes are 4-Channel Mode (Ch04), 5-Channel Mode (Ch05), 6-Channel Mode (Ch06), 9-Channel
Mode (Ch09), or 10-Channel Mode (Ch10).
3. After you have chosen your desired DMX Channel mode, plug in the fixture via the XLR connec-
tions to any standard DMX controller.
11
Advertisement
Table of Contents
