Chapter 2
2.14 JP12 - POWER SUPPLY SELECTION
Note:
You should set the 'Power Supply Type' (Section 4.4) correctly to match
this jumper setting.
2.15 JP3, JP13 – KEYBOARD WAKE-UP/PASSWORD
JP3 and JP13 are used for ATX power wake-up by keyboard password which is set
by BIOS setup.
2.16 JP4 – CPU OVERHEAT ALARM
JP4 is an optional jumper (it may not be installed on the mainboard when the
optional CPU overheat alarm system not installed). When JP4 is set as pin 2-3
shorted, the optional CPU overheat alarm system will be enabled. If it is set to all
pins are opened, the optional CPU overheat alarm system will be disabled.
18
Table 7: Power Supply Selection