Introduction - DTK PAM-0067V E1 User Manual

High performance pentium pci mainboard
Table of Contents

Advertisement

CHAPTER 1
Preface
The motherboard is a LPX form factor high performance all in one mainboard. It is developed
around the pentium microprocessor with 64-bit access to data transfer and MMX technology.
It includes VIA VT82C598MVP system chipset, ATI 3D Rage Turbo AGP/Rage II C AGP
Integrated Graphics Accelerator, Winbond W83977EF-AW super I/O chip, Optional ESS
1869 Sound System.
Features
Processor
Intel Pentium/MMX, Cyrix 6x86/6x86L/6x86MX/M II, AMD K5/K6/K6-2/K6-III and IDT
C6 CPU.
The mainboard can run with following speeds:
90, 100, 110, 120, 133, 150, 166, 200, 233, 250, 266, 300, 333, 350, 400 and 450MHz or
above base on 100MHz FSB
Chipset
VIA VT82C598MVP PCI/AGP System Controller
VIA VT82C586B PCI Integrated Peripheral Controller
ATI 3D Rage Turbo AGP/Rage II C AGP Integrated Graphics Accelerator
Winbond W83977EF-AW Super I/O Controller
ESS 1869 Audio-Drive Sound Controller (Optional)
Cache Size
Built in 512KB Synchronised Pipelined Burst Mode SRAM to achieve the high Pentium
system performance.
Main Memory
Support Mixed Memory Technologies: Extend Data Output (EDO), Standard Page Mode
(SPM) and Fast Page Mode (FPM) and Synchronous DRAM (SDRAM) can work together.
Memory configurations from 8MB to 256MB are possible using combination of 1M*32 to
8M*32 and 2M*32 to 8M*32 SIMM module (32 bit no-parity 72-pin SIMM module).
Graphics Controller
Support AGP 2x Mode Transfer rate for Rage Turbo & AGP 1x mode for Rage II C.
On board 2MB Video RAM, can be expanded to 4MB (with 2MB SGRAM module), or
4MB Video RAM on board (optional), can be expanded to 8MB (with 4MB SGRAM
module).
3D, 66MHz/133MHz/266MHz, 532MB/s fast bus speed, Hardware Acceleration for DVD
player for Rage Turbo AGP.

INTRODUCTION

1

Advertisement

Table of Contents
loading

Table of Contents