Table of Contents
Advertisement
3.13 J17 - WAVETABLE EXPANSION CONNECTOR
J17 is a 2x13 pin male connector, which is used to connect the hardware wavetable
expansion card.
3.14 J18, J19 - AUDIO EXTENSION CARD GOI-660
CONNECTOR (OPTIONAL)
Use the 9-way cable to connect the J18 with J1 of GOI-660.
Use the 15-way cable to connect the J19 with J2 of GOI-660.
3.15 J21 – TV OUT CONNECTOR
This is a reserved connector for TV-OUT extension which is a MPEGTV2 chip on
the card to encode the VGA signals to TV composite signals.
3.16 J26 – CUSTOMER IR CONNECTOR
J26 is a five-pin connector for the customer Infrared device. The pin definition is
listed as follows:
Fig. 18 Customer IR Connector
Connector Configuration
27
Advertisement
Table of Contents
