Table of Contents
Advertisement
Chapter 5
5.3
VCD PLAYER FOR WINDOWS 9x
a)
Under Windows 9x, insert the CD into the CD-ROM (say d:)
b)
Click Start on the taskbar in Windows 9x
c)
Click Run on the menu bar in Windows 9x
d)
Type d:\Atiagp\VIDEO PLAYER\Disk1\setup
e)
Follow the on screen instructions to complete the installation
f)
Upon successful completion of the VCD Player installation, the following
message will be displayed
5.4
SOUND DRIVER INSTALLATION
This section is valid for the system with sound chip built in.
(I)
Windows 3.1
a)
Under Windows 3.1, insert CD into the CD-ROM (say d:)
b)
Click File on the menu bar in Windows 3.1
c)
Select Run command by clicking Run
d)
Type d:\ESS1869\ES1869\W31\setup
e)
Follow the on screen instructions to complete the installation
f)
After the installation is completed, Windows should be restarted to let the
drivers take function
(II)
Windows 9x
For a newly installed Win9x system:
a)
Upon boot up, the system will detect the "ESS 1869 Plug and Play Audio
Drive"
b)
Windows 9x will prompt for the driver diskette, then insert the CD into CD-
ROM (say d:)
c)
When Windows 9x ask for driver, browse for driver D:\ESS1869\SOFT WAVE
TABLE directory
d)
For the GamePort joy-stick setting, use the default driver provided from
Windows 9x CD
e)
Insert the required Windows 9x distribution disk and click OK
f)
After the installation is completed, Windows 9x should be restarted to let the
drivers take function
g)
When Win98 installed, the default Audio drivers will be installed, but with a
little problem for midi play. So the Audio drivers should be updated with
supported All-In-One CD-ROM Drivers. Click ESS1869 Control Interface &
ESS1869 Plug and Play Audio Drive in Device Management of System and
click
Drivers,
\ESS1869\SOFTWAVE TABLE to update the drivers.
50
update
drivers
and
browse
to
the
CD-ROM
Advertisement
Table of Contents
