Jp8, 9 - Power Supply Selection; Reserved Jumpers; Memory Configuration - DTK PAM-0066I User Manual

2.11 JP8, 9 - POWER SUPPLY SELECTION

Note: You should set the 'Power Supply Type' (Section 4.4) correctly to match
this jumper setting.

2.12 RESERVED JUMPERS

JP6 is reserved for CPU overheat alarm testing. Default setting is 2-3 closed.

2.13 MEMORY CONFIGURATION

The mainboard lets user upgrade system memory via SIMM sockets on the mainboard.
On board memory is located in two banks: Bank 0 and Bank 1. Four SIMM sockets
(SIMM1, SIMM2, SIMM3, SIMM4) are provided for SPM, FPM and EDO RAM
SIMM.
Note: The type of SIMM1/SIMM2 must be same.
The type of SIMM3/SIMM4 must be same.
The total memory size is 8 - 256MB and of table 6 provide the typical memory
configurations supported by the mainboard.
The memory size of SIMM can be 4MB, 8MB, 16MB, 32MB or 64MB.
Table 6: Power Supply Selection
Bank 0
(SIMM1/2) (SIMM3/4)
Installed
Installed
None
Table 7
Jumper Settings
Bank 1
None
Installed
Installed
17