Chapter 3
3.4
J11 - ATX POWER SUPPLY CONNECTOR
Fig. 16 J11 - ATX Power Supply Connector
3.5
J3 - FLOPPY DRIVE CONNECTOR
This connector supports the floppy drive ribbon cable. After connecting the single end
to the board, connect the two plugs on the other end to the floppy drive.
3.6
J7, J8 - PRIMARY/SECONDARY IDE
CONNECTORS
These connectors support the provided IDE hard disk ribbon cable. After connecting
the single end to the board, connect the two plugs on the other end to your hard disk.
18
Fig. 17 I/O Connectors