Advertisement
1. JP13 – MULTIPLE FUNCTION JUMPER
JP13 is a front panel multi-function jumper includes reset, harddisk, LED,
GREEN LED and power button (suspend switch).
following figure.
Fig. 6 Multiple Function Jumper
2. J2, J3 J4– CPU FAN CONNECTOR
J2, J3, J4 are three-pin connectors, which are used to connect with the CPU Fan
or the Case Fan which will be monitored by the on board hardware doctor, and
controlled the Fan speed.
3. J5 – ATX POWER SUPPLY CONNECTOR
J5 is a 2x10 pin male connector. Plug the power connector of the ATX power
supply into the connector.
FAN3
FAN1
FAN2
Installation
The pin definition is
17
Advertisement
