Kontron ePanel-C3 Technical Manual page 38

Hide thumbs Also See for ePanel-C3:

Table of Contents

PCI/PnP Setup

Select the PCI/PnP tab from the setup screen to enter the Plug and Play BIOS Setup screen.

Plug and Play O/S

Set this value to allow the system to modify the settings for Plug and Play operating system support.

Reset Configuration Data

Set this value to allow the BIOS to rest the Configuration Data in the BIOS.

PCI Latency Timer

Set this value to allow the PCI Latency Timer to be adjusted. This option sets the latency of all PCI devices on

the PCI bus.

Allocate IRQ to VGA

Set this value to allow or restrict the system from giving the VGA adapter card an interrupt address.

Palette Snooping

Set this value to allow the system to modify the Palette Snooping settings.

PCI IDE BusMaster

Set this value to allow or prevent the use of PCI IDE busmastering.

OffBoard PCI/ISA IDE Card

Set this value to allow the OffBoard PCI/ISA IDE Card to be selected.

IRQ

Set this value to allow the IRQ settings to be modified.

DMA

Set this value to allow the DMA setting to be modified.

Page 38 of 62 Pages

Table of Contents