Table of Contents
Advertisement
6. BIOS-DESCRIPTION
The ePanel-C3 is equipped with an AMI Software BIOS which is located in a Flash EPROM on board. This
device has 8bit wide access. Faster access is provided by the shadowing to BIOS to RAM.
6.1. The Setup Guide
With the AMI BIOS Setup program, you can modify BIOS settings and control the special features of the
computer. The setup program uses a number of menus for making changes and turning the special features on
or off.
6.1.1. General Information
To start the BIOS setup utility press <DEL> when the string Press <Del> to enter Setup is displayed
during bootup. The Main Menu will be displayed.
•
The Menu Bar
The Menu Bar at the top of the window lists all the different menus. Use the up/down arrows to make a
selection.
•
The Legend Bar
Use the keys listed in the legend bar on the bottom to make your selection or exit the current menu. The table
below describes the legend keys and their alternates:
Key
<Esc>
↑ or ↓ Arrow key
<Enter>
To select an item, simply use the arrow key to move the cursor to the field you want. Then use the Enter key to
select a value for that field. The Save Value and Exit command in the Exit Menu save the values currently
displayed in all the menus.
To display a setup menu, use the arrow keys to move the cursor to the sub menu you want. Then press
<Enter>.
Function
Exit this menu
Move cursor up and down
Execute command or select submenu
Page 27 of 62 Pages
Advertisement
Table of Contents
