Advertisement
Quick Links
Advertisement
Related Manuals for Yealink W70B
Summary of Contents for Yealink W70B
- Page 1 Registering Headsets to W70B...
- Page 2 Registering Headsets to W70B 1. Introduction 2. Switching Headset Mode (Only Applicable to WH62/WH63) 3. Registering the Headset 4. Pairing the Headset with a Handset 5. Using the Headset to Manage Calls...
-
Page 3: Supported Headsets
Registering Headsets to W70B Introduction After registering the headsets to the W70B, you can use them as standalone devices or with a handset registered at the same base. Supported Headsets You can register the following headsets to W70B: • WH62/WH63 •... - Page 4 Registering Headsets to W70B WH62/WH63 WH62/WH63 Portable WHM621/WHD622/WHM631 with Charging Cable • For WH62/WH63, after switch the mode, the base in this feature will be idle. • For WH62/WH63 Portable, the WDD60 Dongle in this feature will be idle. • The WHM621/WHD622/WHM631 with Charging Cable is the most suitable series products for this feature.
-
Page 5: Hardware Introduction
Registering Headsets to W70B Hardware Introduction This guide will take WH62 as an example. Mute Button Call Control Button Voice Button PC Button Phone Button... - Page 6 （*Only Applicable to WH62/WH63) Description: You can register the headset to the W70B and use it as a stand-alone device or pair the headsets with a handset registered on the W70B. Switching Method: Hold the Voice button and Phone button of the headset base for 5 seconds. The PC, Voice and Phone button LED indicator on the headset base will flash for 5 seconds and off.
-
Page 7: Registering The Headset
Before registering the headset, you have to put the base station into registration mode. Put the W70B into registration mode Method 1: Method 2: ① Go to Status Handset & Voip on the W70B web user Long press the on the base station till the registration LED flashes. - Page 8 Registering Headsets to W70B Registering the Headset ① Reboot the headset and put the headset into the ② After the headset and W70B are all in the registration mode according to the following steps. registration mode, the headset will automatically register to the W70B.
- Page 9 Pairing the Headset with a Handset You can pair the headset with a handset registered on the W70B. The headset will get the same extension number as the handset. 1. On the web user interface, go to Account → Number Assignment. Check the account you want to share with the handset.
- Page 10 Registering Headsets to W70B Using the Headset to Manage Calls After you pair the headset with a handset registered on the W70B, both the headset and handset will ring when receiving an incoming call. Redial Retrieve Push Scene: Double press the Call Control...
- Page 11 Visit support.yealink.com for more information.
Need help?
Do you have a question about the W70B and is the answer not in the manual?
Questions and answers