Yealink W70B User Manual page 59

| Call Features | 59
About this task
It is only applicable to CP930W/CP935W.
Procedure
Tap Join when the phone receives a new call.
On the CP935W, tap Join Conf.
The conference among the original call(s) and the incoming call is set up. If you are in a conference, the new party
will join the conference.
Holding or Resuming a Conference Call
When you place a conference call on hold, other participants cannot hear each other until you resume the
held conference call.
About this task
It is only applicable to CP930W/CP935W.
Procedure
1. Tap Hold to place the conference on hold.
2. Tap Resume to resume the held conference call.
Muting/Unmuting a Conference Call
When you mute the local microphone during a conference call, other participants can hear each other
except you.
Procedure
1. Press the MUTE key to mute the conference.
2. Press the MUTE key again to unmute the conference.
Splitting a Conference Call
You can split the conference call into individual calls. After the split, the conference call ends, and other
parties are held.
About this task
It is not applicable to DD phones.
Procedure
Select Split.
On the CP930W, select Manage > Split All.
On the CP935W, tap and select Split.
Managing Conference Participants
You can manage the conference participants to make the conference more flexible.
About this task
It is only applicable to CP930W/CP935W.