Yealink W56P Quick Start Manual
Hide thumbs
Also See for W56P:
- User manual (118 pages) ,
- Quick start manual (61 pages) ,
- Manual (60 pages)
Related Manuals for Yealink W56P
Summary of Contents for Yealink W56P
- Page 1 IP DECT Phone W56P & W56H Quick Start Guide(V80.10) www.yealink.com Applies to firmware version 25.80.0.10 or later.
- Page 2 The following items are included in your W56H package: W56H Handset Rechargeable Battery USB Charger Cradle Power Adapter Belt Clip Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance.
-
Page 3: Assembling The Phone
Assembling the DECT Phone Assembling the Phone 1. Connect the network and power for the base station in one of the following ways, as shown below: a. AC Power Option b. PoE (Power over Ethernet) Option IEEE 802.3af compliant PoE Hub/Switch Note: If inline power (PoE) is provided, you do not need to connect the power adapter. - Page 4 3. Connect the charger cradle and charge the handset, as shown below: Note: The handset should be used with original power adapter (5V/600mA) only. The use of the third-party power adapter may cause the damage to the handset. The charging status of the handset is indicated in the top right-hand corner of the LCD screen.
- Page 5 Getting Started Shortcuts This helps you get quick access to features by pressing the shortcut keys directly without having to scroll through the menu.You can press the following predefined shortcut keys to access some frequently used features when the handset is idle: Press the left soft key to access the call history.
- Page 6 2.Select the desired base and press the OK soft key. The handset begins searching the base. 3.Press the OK soft key after searching a base successfully. 4.Enter the base PIN (default: 0000), and then press the Done soft key to complete registeration.
- Page 7 Basic Operations Basic Operations Turning Handset On/Off To turn the handset on, do one of the following: Press , then the LCD screen lights up. Place the handset in the charger cradle. The handset will be turned on automatically. To turn the handset off: Long press to turn the handset off.
-
Page 8: Local Directory
Ring Tones 1.Press the OK key to enter the main menu, and then select Settings->Audio->Ring Tones ->Melodies. 2.Press to highlight the Intercom Call option or the desired line. 3.Press to select the desired ring tone. 4.Press the Save soft key to accept the change. Local Directory To add a contact: 1.Press the OK key to enter the main menu, and then select Directory. - Page 9 Basic Call Features Placing Calls To place a call directly: 1.Do one of the following: Enter the desired number when the handset is idle. Press to enter the pre-dialing screen. Enter the desired number using the keypad. If there are multiple lines assigned to your handset as outgoing lines, press the Line soft key to select the desired line.
- Page 10 Answering Calls To answer a call, do one of the following: Press the Accept soft key. Press Press Press Note: You can ignore an incoming call by pressing the Silence soft key or reject an incoming call by pressing Ending Calls Press Call Mute Press...
- Page 11 2.Enter the number you want to transfer the call to. 3.Press the Transfer soft key. Semi-Attended Transfer 1.Press the Options soft key during a call, and then select Transfer. 2.Enter the number you want to transfer the call to. 3.Press to dial out.
- Page 12 VoIP products characterized by reliable quality, easy deployment and affordable price for more than a decade. Today, customers from over 140 countries rely on Yealink as the backbone of global collaboration to extend the value of network communications.
Need help?
Do you have a question about the W56P and is the answer not in the manual?
Questions and answers