Page 1
DECT IP Phone W53P & W53H Quick Start Guide(V83.13) For W60B firmware: 77.83.0.10 or later For W53H firmware: 88.83.0.10 or later...
Page 2
Quick Start Guide Ethernet Cable Belt Clip Rechargeable Battery Handset Protective Case (Optional) Note: Yealink W53P DECT IP phone consists of one W60B base station and one W53H handset. W53H Package Contents Charger Cradle Power Adapter W53H Handset Battery Cover...
Page 3
PoE (Power Over Ethernet) Option Note: • If you choose method a, use Yealink-supplied power adapter (5V/600mA). A third-party power adapter may damage the base station. • If you choose method b, you do not need to connect the power adapter. Make sure the hub/switch is PoE-compliant.
Page 4
2b. (Wall-Mount Installation) Attach the base station. 3. Insert the battery into the handset. 4. Attach the belt clip to the handset. 5. (Optional) Put the handset in the protective case and attach the belt clip. 6. (Optional) Mount the charger cradle to the wall. 40mm...
7. Connect the charger cradle and charge the handset. Note: • Use Yealink-supplied power adapter (5V/600mA). A third-party power adapter may damage the handset. • Check the charging status on the top-right corner of the LCD screen. Getting Started Shortcut Keys Shortcut keys help you quickly access the frequently used phone features.
When the handset LCD screen prompts “Unregistered!”, long press on the base station till the registration LED indicator flashes. There are two methods to register a new handset: Easy Registration: 1. Press the Reg soft key on the handset to register quickly. Normal Registration: 1.
4. Make the desired changes. 5. Press the Save soft key to accept the change. Note: • The DECT IP phone supports either or both IPv4 and IPv6 addressing modes, but IPv6 is disabled by default. • Wrong network settings may result in inaccessibility of your phone and may affect the network performance.
1. Press the OK key to enter the main menu, and then select Settings->Audio-> Ring Tones->Melodies. 2. Press to highlight Intercom Call or the desired line. 3. Press to select the desired ring tone. 4. Press the Save soft key to accept the change. Local Directory To add a contact: 1.
• Enter the desired number when the handset is idle. • Press to enter the pre-dialing screen. Enter the desired number using the keypad. If there are multiple lines assigned to your handset as outgoing lines, press the Line soft key to select the desired line.
Press the Options soft key during a call, and then select Hold. To resume a call, do one of the following: • If there is only a call on hold, press the Resume soft key. • If there are two calls on hold, press the Resume soft key to resume the current call. Press the Swap soft key to swap between calls.
Page 11
• Defective or exhausted battery should never be disposed of as municipal third party. We are not liable for problems with Yealink device arising from the use waste. Return old battery to the battery supplier, a licensed battery dealer or a of this product;...
Page 12
As one of the best providers in more than 140 countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market share of SIP phones shipments.
Need help?
Do you have a question about the W53P and is the answer not in the manual?
Questions and answers