Safety Labels On The Machine - Kubota K008-5 Operating Instructions Manual

Safety labels on the machine

Care of safety labels
Keep safety labels clean and free from interfering objects.

Clean safety labels with soap and water and dry with a soft, clean cloth.

Replace damaged or missing safety labels with new ones from your KUBOTA dealer.

If a component with glued-on safety labels is replaced with a new part, make sure that the new labels are

affixed to the same location as the replaced component.
Safety labels should be stuck only on clean and dry surfaces. Press any air bubbles into the outer edge of the

sticker.
The positioning of the safety labels is illustrated in the following figures.
20
Safety rules
W9215-8135-1
06/2021