Kubota K008-5 Operating Instructions Manual page 118

4. Connect the digital meter (A) (optional: P/N RB257-5311-0) and the switches (B) (optional:
P/N: RB257-5322-0) with the wire harness (C) (optional: P/N: RA058-9661-0).
A
A Digital meter
B Switches
C Wire harness
5. Insert red key into the starter switch.
Do not turn the key at this point. If the key is in the RUN position, turn it back to the STOP position.
6. Press the selector switch connected with the red and blue colour wire harness.
116
B
I
II
I 12-pin connector to connect with the digital me-
ter
II 4-pin connector to connect with the switches
III 8-pin connector to connect with the coupler for
the key register
Operation
C
III
W9215-8135-1
06/2021