Swivelling The Roll-Over Safety Bar Upward And Downward And Locking It - Kubota K008-5 Operating Instructions Manual

Swivelling the roll-over safety bar upward and downward and locking it

Position the front attachments as illustrated.

Turn off the engine (page 81).

Pull out the safety bolts (1 and 2).

Pull out the locking bolts (3 and 4).

Grasp the upper part (5) of the safety bar firmly with both hands

at the highest point possible above the swivel joints.
Slowly swivel the upper part of the safety bar downward.

Take care to assure that your hands are not crushed
STOP
during the downward movement.
The excavator must not be operated when the safety bar has been swivelled downward. Always carry
out work with the safety bar swivelled upward, unless you drive through a low passageway on a flat
STOP
surface
Swivelling the roll-over safety bar upward is effected in reverse order.

Make sure that the roll-over safety bar in the swivelled upward position is locked by the locking bolts
STOP
(previous figure/3 and 4) and secured by the safety bolts (previous figure/1 and 2).
86
Operation
3 1 2 4
W9215-8135-1
5
06/2021