U10-5; Adjusting The Operator's Seat - Kubota K008-5 Operating Instructions Manual

Operation

U10-5

Move the left or right control console (2) up as far as possible

by pulling the control lever lock (1) up.
Hold the hand rail tightly and get on to the machine.

Sit down on the operator's seat.

When lowering the control lever lock, make sure no hands are

trapped.
The control console must remain in the raised position
until the engine is started, as the engine can only be
started in this position.

Adjusting the operator's seat

Adjust the operator's seat so that fatigue-free and comfortable working is possible. It should be pos-
sible to operate all controls safely.
Horizontal seat adjustment (seat stand-off)
Pull the horizontal seat adjustment lever (1) up and move the

seat to the desired position by moving it forward or back, then
release the lever.
Check that the seat is locked in place.
STOP
W9215-8135-1
06/2021
2
1
75