Protective Structure Of Roll-Over Safety Bar - Kubota K008-5 Operating Instructions Manual

Safety rules

Protective structure of roll-over safety bar

The excavator is equipped with a protective structure that protects the operator from severe injury or
death if the machine crashes or overturns.
The roll-over safety bar was designed in accordance with current safety standards and tested for verification as:
Roll-over protection
To ensure greatest protection by means of this protective structure, the following applies:
The seat belt must be fastened while the excavator is being op-

erated.
Do not make any structural changes to the protective structure.

In the event of damage, please contact your KUBOTA dealer.

(Do not repair!)
Never operate the excavator without the protective structure.

Never operate the machine with a higher operating weight than

the maximum permissible total weight indicated on the ROPS
identification plate (1).
If the roll-over safety bar (1) is elevated and locked in that po-

sition, the operator is protected from being crushed in the event
of the machine tipping over if the seat belt is tightly fastened.
W9215-8135-1
06/2021
ROPS (Roll-Over Protective Structure)
1
1
31