Kubota Bucket Accessories; Replacing The Bucket; Removing The Bucket - Kubota K008-5 Operating Instructions Manual

KUBOTA bucket accessories

For further bucket accessories, please contact your KUBOTA dealer.
The size, weight and arm bracket of the excavator are important factors in the selection of attach-
ments. These factors must be made known to the attachment manufacturer when ordering attach-
ments, and be observed by the operator when operating the excavator. Various attachments are nev-
ertheless of limited use only.

Replacing the bucket

When replacing the bucket, make sure to wear eye protection, a helmet and protective gloves.
STOP
During attaching and detaching, chippings and burrs may appear on the bolts or bushings. These
STOP
may cause severe injuries.
Never use your fingers for the alignment of the components (linkage, bucket, arm). The components
STOP
may sever your fingers by uncontrolled movements.
When attaching the bucket or other attachments, O-rings and spacers are required. They are sup-
plied with the machine.
Please contact your KUBOTA dealer if spacers with different dimensions are required.

Removing the bucket

Lower the bucket onto a flat, even surface.

Stop the engine.

Ensure that the components indicated below remain free of dirt

and dust.
Unscrew the safety pins on bolts (2) and (3).

The bucket is stored with bolts (2) and (3) in a total of
four bearing eyes. An O-ring is positioned at each
bearing eye.
162
4
3
Accessories
1
2
W9215-8135-1
06/2021