Kubota K008-5 Operating Instructions Manual page 59

Assembly and functions
4. Right control lever
The right control lever is used to move the boom and the bucket. See the figure above illustrating the right
control lever
5. Dozer control lever
The dozer control lever is used to raise or lower the dozer blade. Pushing the lever forward lowers the dozer
blade and pulling it back raises it.
6. Boom swing pedal
This pedal is used to swing the boom right and left.
7. Control lever lock
The control lever lock prevents the operator from inadvertently activating the control levers.
8. Auxiliary port pedal
The auxiliary port pedal is used to operate an implement.
9. Throttle lever
The engine speed can be infinitely adjusted from idle to maximum engine speed using the throttle lever. To
increase engine speed, pull back the throttle lever. To decrease engine speed, push forth the throttle lever.
10. Selector lever for the dozer/extendable track width
With the selector lever in the extendable track width position, the dozer control lever can be used to adjust the
track width. To reduce the track width, push the lever forward, to increase, pull the lever backward.
W9215-8135-1
06/2021
57