Advertisement
Before getting started
Follow the disinfectant manufacturer's recommendations regarding appropriate personal protective
equipment (PPE), such as protective eyewear and gloves.
Inspect the system to determine that it is free of any unacceptable deterioration, such as corrosion,
discoloration, pitting, or cracked seals. If damage is evident, discontinue use, and contact FUJIFILM
SonoSite or your local representative.
Confirm that cleaning and disinfecting materials are appropriate for your facility's use. FUJIFILM SonoSite
tests cleaners and disinfectants for use with the FUJIFILM SonoSite systems and transducers.
Disinfectants and cleaning methods listed in this chapter are recommended by FUJIFILM SonoSite for
material compatibility with the products.
Ensure that the disinfectant type and the solution strength and duration are appropriate for the
equipment and application.
Follow manufacturer recommendations and local regulations, when preparing, using and disposing of
chemicals.
WARNINGS
Cautions
64
Ensure that cleaning and disinfecting solutions and wipes are not expired.
Some cleaners and disinfectants can cause an allergic reaction to some individuals.
Do not allow cleaning solution or disinfectant into the system connectors, or
transducer connector.
Do not use strong solvents such as thinner or benzene, or abrasive cleansers, since
these will damage the exterior surfaces. Use only FUJIFILM SonoSite
recommended cleaners or disinfectants.
Before getting started
Advertisement
Chapters
