Device Settings - Pepperl+Fuchs IUH-F192-V1 Series Quick Start Manual

IUH-F192-V1-*
Commissioning
Country identifiers for IUH-F192-V1-FR2
(The currently valid transmission licenses can be found in the data sheet at pepperl-fuchs.com)
Country
Identifier
02
03
07
08
09
10
11
12
13
14
The list of country identifiers is extended from time to time. For the most current list of country
identifiers and the technical details of the regional settings, refer to the manual on
www.pepperl-fuchs.com.
For an example of reading and writing the country identifier, see chapter 4.2.
4.2

Device Settings

Warning!
Device not configured or configured incorrectly
Configure the device prior to commissioning. A device that has not been configured or
configured incorrectly may lead to faults in the plant.
Before commissioning the read/write head, you need to configure the control interface. To do
so, read the "Commissioning" chapter of the manual for your control interface.
Configure the read/write heads with the described system commands. For a parameterization
example, see see chapter 4.3.
Caution!
Uncontrolled triggered processes
Before commissioning the device, make sure that all processes are running smoothly;
otherwise damage may occur in the plant.
14
Occupied Frequency Bandwidth
Frequency Access Method
902 MHz – 928 MHz
Frequency hopping spread spectrum
920 MHz – 925 MHz
Frequency hopping spread spectrum
915 MHz – 928 MHz
Frequency hopping spread spectrum
916.7 MHz – 920.5 MHz
Programmable frequency list
917.2 MHz – 920.4 MHz
Frequency hopping spread spectrum
920 MHz – 926 MHz
Frequency hopping spread spectrum
921.5 MHz – 928 MHz
Frequency hopping spread spectrum
920 MHz – 925 MHz
Frequency hopping spread spectrum
919 MHz – 923 MHz
Frequency hopping spread spectrum
920 MHz – 925 MHz
Frequency hopping spread spectrum
Country or Region
USA
Canada
Mexico
Argentina
Colombia
China
Brazil
Japan
South Korea
Australia
New Zealand
Hong Kong
Thailand
Malaysia
Singapore
Vietnam