Introduction; Purpose Of This Quick Start Guide; Product Documentation On The Internet; Declaration Of Conformity (R&Tte Directive 1995/5/Ec) - Pepperl+Fuchs IUH-F192-V1 Series Quick Start Manual

Read/write head for identcontrol
Hide thumbs Also See for IUH-F192-V1 Series:
Table of Contents

Advertisement

IUH-F192-V1-*

Introduction

1
Introduction
1.1

Purpose of this quick start guide

This quick start guide contains basic instructions for operating the device. However, the manual
takes priority over the quick start guide.
1.2

Product documentation on the internet

You can view all the relevant documentation and additional information on your product at
http://www.pepperl-fuchs.com. Simply enter the product name or model number in the
Product/Key word search box and click Search.
Select your product from the list of search results. Click on the information you require in the
product information list, e.g., Technical documents.
A list of all available documents is displayed.
1.3
Declaration of Conformity (R&TTE Directive 1995/5/EC)
This product was developed and manufactured under observance of the applicable European
standards and guidelines.
Note!
A Declaration of Conformity can be requested from the manufacturer or downloaded from
www.pepperl-fuchs.com.
The product manufacturer, Pepperl+Fuchs GmbH, 68307 Mannheim, has a certified quality
assurance system that conforms to ISO 9001.
ISO9001
1.4

FCC Information

FCC ID: IREIUH-F192-V1
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
Attention:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
4
undesired operation.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iuh-f192-v1-fr1Iuh-f192-v1-fr2

Table of Contents