Table of Contents
Advertisement
IUH-F192-V1-*
Installation
3
Installation
3.1
Storage and transport
For storage and transport purposes, package the unit using shockproof packaging material
and protect it against moisture. The best method of protection is to package the unit using the
original packaging. Furthermore, ensure that the ambient conditions are within allowable range.
3.2
Unpacking
Check the product for damage while unpacking. In the event of damage to the product, inform
the post office or parcel service and notify the supplier.
Check the package contents against your purchase order and the shipping documents for:
Delivery quantity
Device type and version in accordance with the type label
Any accessories ordered
Retain the original packaging in case you have to store or ship the device again at a later date.
Should you have any questions, please contact Pepperl+Fuchs.
3.3
Mounting
The read/write head is intended for wall mounting or mounting on brackets in internal areas.
Please mount the read/write head using only the holes provided in the housing. The preferred
mounting direction is with the cable connection facing vertically downwards.
Note!
Do not lay the connection cable in the main beam direction of the antenna.
To attach the read/write head, use four screws with a diameter of 6 mm, as well as mounting
materials that are suitable for the type of mounting surface. The tightening torque of the screws
depends on the type of mounting.
Caution!
Mounting the read/write head
Make sure that the read/write head is firmly attached to the mounting surface.
Mounting the Read/Write Head
Figure 3.1
9
Advertisement
Table of Contents
