Commissioning; Initial Commissioning - Pepperl+Fuchs IUH-F192-V1 Series Quick Start Manual

IUH-F192-V1-*

Commissioning

4 Commissioning
4.1

Initial Commissioning

Note!
Transmission License
A country-specific transmission license is required to operate the read/write head. In the
European Union and Turkey, the manufacturer's EU declaration of conformity constitutes an
adequate license. A currently valid transmission license may not exist for all countries of use
listed in this chapter, as transmission licenses are temporary in some countries. All currently
valid transmission licenses can be found in the data sheet for the respective read/write head at
www.pepperl-fuchs.com
All IUH-F192-V1-* read/write heads operate within their maximum frequency range from
865 MHz to 868 MHz, or from 902 MHz to 928 MHz, with the appropriate settings for the
relevant country. This enables the following parameters to be set according to the applicable
regulations for the relevant country:
The maximum occupied bandwidth
The channel bandwidth
The channel plan used
The frequency access method
The maximum power setting
Note!
Country Identifier
The IUH-F192-V1-FR* read/write head has no valid country identifier by default. This status is
indicated by the flashing green LED. In this state, the read/write head will accept only the
command for setting the relevant country identifier. Once you have parameterized a valid
country identifier, you can begin using the read/write head.
The IUH-F192-V1-FR2-02 is supplied ex-works with the country identifier "02" for the USA,
Canada, and Mexico. Due to legal regulations, you cannot change this country identifier in the
IUH-F192-V1-FR2-02.
Note!
The country identifier set is saved in the read/write head as non-volatile. The country identifier
setting is not affected by a reset to the factory settings. It can be overwritten with another valid
country identifier at any time.
Country identifiers for IUH-F192-V1-FR1
(The currently valid transmission licenses can be found in the data sheet at pepperl-fuchs.com)
Country
Identifier
01
04
05
06
Occupied Frequency Bandwidth
Frequency Access Method
865.6 MHz – 867.6 MHz
Programmable frequency list
865.0 MHz – 867.0 MHz
Programmable frequency list
866.0 MHz – 868.0 MHz
Programmable frequency list
866.0 MHz – 867.6 MHz
Programmable frequency list
Country or Region
EU and other countries subject to EN
302208
India
Singapore, Vietnam
Russia
13