Table of Contents
Advertisement
IUH-F192-V1-*
Product Description
2
Product Description
2.1
General Functions and Features
Functions
The read/write head was developed for reading and writing passive read/write tags with an
ultra-high operating frequency.
Detection Range
The detection range is typically 4 meters. Tags that comply with EPC Gen 2 (ISO/IEC 18000-
63) are supported.
Maximum Frequency Range
The IUH-F192-V1-FR1 read/write head can be operated in the frequency range from 865 MHz
to 868 MHz. The IUH-F192-V1-FR2 read/write head can be operated in the frequency range
from 902 MHz to 928 MHz.
Features
The read/write head has the following features:
2 x 3 function indicator LEDs
Industrial housing
Bulk detection
Connects to the IDENTControl via connector V1 (M12 x 1)
Protected against electrostatic discharge
Integrated antenna
The IUH-F192-V1-FR1 and IUH-F192-V1-FR2 read/write heads have a linear dual-polarized
antenna. The read/write heads can transmit and receive waves with horizontal and vertical
polarization.
2.2
Indicators and Operating Elements
The IUH-F192-V1-* read/write head has 2 x 3 LEDs, which are green/blue/yellow. The various
indicators denote:
Green LED:
Continuously on - Power on
Flashing - Region code must be set. See chapter 4.1.
Yellow LED: Read/write operation successful
Blue LED: Transmission mode
2.3
Connection
The read/write head is connected to the IDENTControl control interface via the M12 x 1
connector.
1
2
3
Figure 2.1
6
5
4
1
+
2
A
3
-
4
B
5
do not connect
Shield
Advertisement
Table of Contents
