Embroidering Preparation; Attaching The Module - Bernina 765 SE Manual

13 Embroidering preparation

13.1 Attaching the Module

NOTICE
Transporting the embroidery module
Damage to the embroidery module connection and machine.
> Remove the embroidery module before transporting the machine.
Prerequisite:
• The slide-on table must not be attached.
> Make sure that the module and the machine are placed on a stable, even surface.
> Make sure that there is enough space around to allow the unimpeded movement of the embroidery arm.
> Lift the embroidery module on the left.
> Carefully push the module from left to right into the embroidery module connection (1) of the machine.
> To remove, lift the embroidery module on the left and carefully pull to the left.
1
1
1017815.0.04_2016-05_Manual_B765_EN
Embroidering preparation
137