Table of Contents
Advertisement
13 Embroidering preparation
13.1 Attaching the Module
Prerequisite:
•
Extension table must not be fitted.
> Make sure that the module and the machine are placed on a stable, even surface.
> Ensure that the embroidery arm can move freely.
> Carefully slide the embroidery module from left to right into the machine's embroidery module
connection (1) and the guide rail (2).
13.2 Removing the embroidery module
> Push the release lever (1) at the carrying handle of the embroidery module, keep it pressed and at the
same time, move the embroidery module carefully to the left.
1
1
2
Embroidering preparation
127
Advertisement
Table of Contents
