Table of Contents
Advertisement
Sewing Preparation
2
Sewing Preparation
2.1 Before Using the Machine for the First Time
BERNINA recommends lubricating the hook before using the machine for the first time or after a longer
period of non-use. (see page 97)
By oiling the hook, the occurrence of unwanted noises in the hook area can be avoided.
2.2 Connection and Switching On
Connecting the Foot Control
> Roll out the connection cable on the underside of the foot control to the desired length.
> Plug in the plug of the connection cable on the machine.
> Place the foot control under the table.
Connecting the Machine
To ensure safe operation of the machine, only the supplied mains cable may be used. The supplied power
cable is designed for the voltage range applicable in the country of use. If the machine is to be used in a
country other than the country of origin, the power cable suitable for that country must be obtained from
the authorized BERNINA dealer.
The power cable for the USA and Canada has a polarized power plug (one contact is wider than the other).
To reduce the risk of an electric shock, the plug can only be inserted into the socket in one way. If the power
plug does not fit in the socket, reverse then insert the power plug. If the reversed power plug still does not
fit, an electrician must install an appropriate socket. Do not modify the power plug in any way.
> Insert the device connector of the power cable into the machine's power cable connection.
> Insert the power plug of the power cable into the socket.
28
Advertisement
Table of Contents
