Figure 13. Using Static Ip; Figure 14. Browser View - Renesas CK-RX65N Quick Start Manual
Hide thumbs
Also See for CK-RX65N:
- User manual (34 pages) ,
- Getting started manual (58 pages) ,
- Getting started manual (55 pages)
Table of Contents
Advertisement
Renesas RX Family
If the DHCP fails to resolve a route or the DHCP server has been disabled, the application uses the static
IP defined in the project. The following should be displayed.
Note: If desired, the user may configure DHCP/static IP and MAC address using the project configuration
(see section 5.4). Save the configuration and re-build, download the project to see the effects of the
changes.
13. Once a successful network connection is established, open the web browser on the host PC. Type the IP
address of the CK-RX65N kit as shown in the Tera Term window in the address bar of the web browser.
The following should be displayed in the web browser.
R20QS0031EG0100 Rev.1.00
May.26.22
Figure 13. Using Static IP
Figure 14. Browser View
CK-RX65N – Quick Start Guide
Page 15 of 28
Advertisement
Table of Contents
