Renesas RX Family
2. Verify that the debug LED (LED5) stops blinking and lights up green indicating that the E2OB drivers are
detected by the CK-RX65N board.
5.6 Downloading and Running the Modified Quick Start Example Project
2
1. In e
studio, click the drop-down menu for the debug icon, select Debug Configurations option.
2. In the dialogue, on the left-hand pane, expand the Renesas GDB Hardware Debugging and select the
built image to debug. In this case, the rx65n_ck_quickstart HardwareDebug.
R20QS0031EG0100 Rev.1.00
May.26.22
Figure 32. Selecting the Debug Option
Figure 33. Selecting the Debug Image
CK-RX65N – Quick Start Guide
Page 25 of 28