Customizing The Quick Start Example Project; Downloading And Installing Software And Development Tools; Figure 15. Next Steps - Renesas CK-RX65N Quick Start Manual

Renesas RX Family
14. In Tera Term, press space to return to the 'welcome and main menu' screen.
15. Press 4 to display Next Steps.
Press space to return to the 'welcome and main menu' screen.

5. Customizing the Quick Start Example Project

This section lists the requirements and instructions for customizing the Quick Start example project.
Hardware Requirements
•
CK-RX65N board
•
Micro USB device cable x2
•
A PC with at least 2 USB ports
•
A router with at least 1 available full duplex Ethernet port*
•
Ethernet cable
Software Requirements
•
®
Windows 10 operating system
•
2
e studio IDE
•
Quick Start example project

5.1 Downloading and Installing Software and Development Tools

Before the Quick Start example project can be modified, it is necessary to download and install software and
development tools on the host PC.
E2OB USB drivers, and e
website at renesas.com/rx/ck-rx65n.
There is no need to download and install software, development tools, and drivers separately.
R20QS0031EG0100 Rev.1.00
May.26.22

Figure 15. Next Steps

2
studio are bundled in a downloadable platform installer available on the Renesas
CK-RX65N – Quick Start Guide
Page 16 of 28