Ck-Rx65N; Introduction; Assumptions And Advisory Notes; Kit Contents - Renesas CK-RX65N Quick Start Manual

Renesas RX Family

1. Introduction

This Quick Start Guide (QSG) provides:
•
An overview of the Quick Start example project that the CK-RX65N board comes pre-programmed with.
•
Instructions for running the Quick Start example project.
•
Instructions for importing, modifying, and building the Quick Start example project using Flexible
Integration Technology (FIT) and e

1.1 Assumptions and Advisory Notes

1. Tool experience: It is assumed that the user has prior experience working with IDEs such as e2 studio
and terminal emulation programs such as Tera Term.
2. Subject knowledge: It is assumed that the user has basic knowledge about microcontrollers, embedded
systems, and FIT to modify the example project described in this document.
3. Prior to running the Quick Start example project or programming the CK-RX65N board, default jumper
settings must be used. Refer to the CK-RX65N user's manual for the default jumper settings.
4. The screen shots provided throughout this document are for reference. The actual screen content may
differ depending on the version of software and development tools used.

2. Kit Contents

The following components are included in the kit:
1. CK-RX65N v1 board
2. RYZ014A PMOD (CAT-M1 Cellular Kit)
3. SIM card (CAT-M1 Cellular Kit)
4. USB Micro B to USB A adapter cable
5. USB Micro B to USB A cable x2
6. Antenna (CAT-M1 Cellular Kit)
R20QS0031EG0100 Rev.1.00
May.26.22
2
studio Integrated Development Environment (IDE).

Figure 1. CK-RX65N Kit Contents

CK-RX65N – Quick Start Guide
Page 7 of 28