Overview Of The Quick Start Example Project; Quick Start Example Project Flow; Figure 2. Quick Start Example Project Flow - Renesas CK-RX65N Quick Start Manual

Renesas RX Family CK-RX65N – Quick Start Guide

3. Overview of the Quick Start Example Project

The Quick Start example project allows the user to change the frequency of the on-board user LED3 (blue)
using the user button (S2). The supported frequencies are 1 Hz, 5 Hz, and 10 Hz.
When the CK-RX65N board running the Quick Start example project is connected to a host PC via USB as a
Full Speed CDC Device, the kit information, MCU die temperature, and user LED blinking frequency are
displayed on a terminal console.

3.1 Quick Start Example Project Flow

Figure 2. Quick Start Example Project Flow

R20QS0031EG0100 Rev.1.00 Page 8 of 28
May.26.22