Renesas RX65N Quick Start Manual
  1. Manuals
  2. Brands
  3. Renesas Manuals
  4. Microcontrollers
  5. RX65N Series
  6. Quick start manual
Renesas RX65N Quick Start Manual

Renesas RX65N Quick Start Manual

Cloud kit
Hide thumbs Also See for RX65N:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Start Guide
Note: The steps described in this document were correct at the time of this document was created and may have
changed at the time of reading.
This document describes how to install and run the AWS cloud connectivity demo on Renesas RX65N Cloud Kit and
visualize the sensor data on the web dashboard.

What you need to get started:

1. Prepare Renesas RX65N Cloud Kit (www.renesas.com/rx65n-cloud)

2. Register AWS account

3. Register Renesas web dashboard account (https://cloud.renesasrx.com/accounts/register#)
4. Write the sample program if your board is re-flashed from the default
(https://www.renesas.com/search/keyword-search.html#q=R01QS0035EU)
5. Prepare Wi-Fi Internet access environment
1. Register AWS Account
1. Create an AWS account by going to portal:
2. After login, go to your account name in upper right-hand corner and click on "My Security Credentials".
3. If the below window pops up, click on "Continue to Security Credentials".
(https://aws.amazon.com)
https://portal.aws.amazon.com/billing/signup#/start
Renesas RX65N Cloud Kit
R12QS0036EJ0101

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RX65N and is the answer not in the manual?

Questions and answers

Related Manuals for Renesas RX65N

Summary of Contents for Renesas RX65N

  • Page 1 Note: The steps described in this document were correct at the time of this document was created and may have changed at the time of reading. This document describes how to install and run the AWS cloud connectivity demo on Renesas RX65N Cloud Kit and visualize the sensor data on the web dashboard.
  • Page 2 4. Click on “Access keys (access key ID and secret access key)”. 5. Click on “Create New Access Key” and ‘Download Key File”. Make a note of the “Access Key ID’ and “Secret Access Key”. This information will be required in Step 7. 2.
  • Page 3 Make sure to assign the COM port assigned to the kit. 13. Ensure link is fitted to EJ2 on the Target Board for RX65N for non-debugger operation. 14. Power up the kit by connecting USB cables to TB board connector ECN1 and Cloud option board CN6 to PC.
  • Page 4 17. If unsure about provisioning data, click any key to program the new provisioning data. Otherwise, if the kit is provisioned with the correct data, then wait for the kit to connect to AWS and skip the steps 18 to 23. 18.
  • Page 5 Copy and paste the private key from the dashboard and press enter. Verify the setting. If correct, enter “0” to write the provisioning data in Flash. Wait about 1 minute without inputting anything from the keyboard. If you enter something from the keyboard here, the SSID and password entered 1) to 6) will be cleared and you will need to enter it again.
  • Page 6 4. Visualize Sensor Data on the dashboard 27. Go back to Dashboard and close the credential window. 28. Click on “Device”. Click “View” button to see the sensor dashboard. 29. The dashboard will open and show the sensor’s value. The sensor value will be updated every 30 seconds.
  • Page 7 6. Next Step After you have completed quick start procedure, review hardware detail of the kit. The hardware detail can be found in the user’s manual of the Target Board for RX65N and Cloud Option Board user’s manual. User Manuals The user manuals for this kit is available at: www.renesas.com/rx65n-cloud...
  • Page 8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Renesas Electronics RTK5RX65N0S00000BE RTK5RX65N0S01000BE...

Table of Contents