Section 1 Specifications - Hach Met One 6000 Series User Manual

Section 1
Instrument
Light source
Weight
Dimensions (W x D x H)
Enclosure
Status indicator
Power requirements
Power consumption, maximum
Operating temperature
Storage temperature
Operating humidity
Storage humidity
VHP Tolerance
Port sizes
Signal output options
Data storage
Sampling
Number of size channels
Flow rate
Sensitivity
Range
Flow control
Inlet pressure
Vacuum requirements
Specifications
Specifications are subject to change without notice.
Long Life Laser™ diode
0.82 kg (1.8 lb)
13.56 cm x 8.93 cm x 12.06 cm (5.34 in. x 3.52 in. x 4.75 in.) (refer to
304 stainless steel
Multi-colored LED for normal status, count alarm, count alert, sensor failure, flow
failure or communication failure
9–28 VDC (source: Class 2 limited energy, < 150 VA)
Serial and pulse units: 3.3 W; Ethernet unit: 4.3 W; Analog: 3.5 W;
Wireless: 7.1 W. Maximum amperage requirement: 1 A
10 to 32 °C (50 to 90 °F)
–40 to 70 °C (–40 to 158 °F)
5 to 95% relative humidity, non-condensing
5 to 98% relative humidity, non-condensing
The sensor flow path is tolerant to Vaporous Hydrogen Peroxide for VHP-based
standard cleanroom disinfecting and cleaning cycles.
Model 6003: barb fitting for 0.32 cm (
outlet tubing
Model 6005: barb fitting for 0.32 cm (
outlet tubing
Model 6015: barb fitting for 0.64 cm (¼-inch) ID inlet tubing, 0.64 cm (¼-inch) ID
outlet tubing
Pulse
Analog 4–20 mA
Serial RS232 with Modbus RTU or FXB communication protocol (no networking)
Serial RS485 with Modbus RTU or FXB communication protocol
Ethernet with ModbusTCP protocol
1000 samples/records. Overwrites oldest record when buffer is full.
Standard: 2; optional: 4 (exception—pulse units have 2 channels only)
Model 6003: 0.1 cfm (2.83 Lpm) ±10%
Model 6005: 0.1 cfm (2.83 Lpm) ±10%
Model 6015: 1.0 cfm (28.3 Lpm) ±10%
Model 6003: 0.3 µm at 0.1 cfm (2.83 Lpm)
Model 6005: 0.5 µm at 0.1 cfm (2.83 Lpm)
Model 6015: 0.5 µm at 1.0 cfm (28.3 Lpm)
Model 6003: 0.3 µm to 10.0 µm at 0.1 cfm (2.83 Lpm)
Model 6005: 0.5 µm to 10.0 µm at 0.1 cfm (2.83 Lpm)
Model 6015: 0.5 µm to 10.0 µm at 1.0 cfm (28.3 Lpm)
Through critical orifice
Ambient to 2.5 mm (0.1 in) Hg vacuum
At least 406 mm (16 in.) Hg (542 mbar)
1
/ -inch) ID inlet tubing, 0.64 cm (¼-inch) ID
8
1
/ -inch) ID inlet tubing, 0.64 cm (¼-inch) ID
8
Figure 1)
3