Section 3 Installation; Component List - Hach Met One 6000 Series User Manual

Section 3

3.1 Component list

1 Met One 6000 Particle Counter
2 Antenna (Wi-Fi unit only)
3 DIN rail mounting kit
4 DIN rail
5 Clip screw (2x)
6 Clip (2x)
7 Service port cable (8-pin DIN to 9-pin serial)
1
Not shown: user manual.
Installation
Important Note: Approved personnel only must install or commission the equipment.
Compare each item in Figure 5
materials to use when the counter is sent to the factory for calibration. If an item is
missing or damaged, contact the manufacturer. Refer to
Figure 5 Instrument components
to the items in the shipment. Keep the packaging
1
8 5-pin connector with clam shell (Ethernet and Wireless
units only)
9 10-pin connector with clam shell (all units except
Ethernet and Wireless)
10 RH/Temp probe (optional)
11 Isokinetic Probe for 0.1 cfm flow option
12 Isokinetic Probe for 1.0 cfm flow option
13 External LED Indicator (optional)
Section 8 on page 49.
11